Make a donation

Author Topic: Threaded bolt head removal....  (Read 2098 times)

Offline u01atc8

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 135
    • Email
Threaded bolt head removal....
« on: September 19, 2010, 04:03:36 pm »
Ok so a little bit of help needed!

I tried to remove my back seats and the bolt for the larger back section seatbelt is threaded already do obviously someone has had a gonat one Yupik a time before I bought it.  So anyway how will I remove it! It's the one if your in th boot on the right hand side screwed into the bottom if the car. I was going to drill through it but was worried that I would hit the fuel tank or something! Then I would get fright!   :jumping:

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Threaded bolt head removal....
« Reply #1 on: September 19, 2010, 06:22:24 pm »
Brute force I would think, it's been screwed in wrongly so it'll normally come back out.  It'll probably not go back on without running a tap down it first.  Much better solution than drilling out if you can manage it.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Threaded bolt head removal....
« Reply #2 on: September 19, 2010, 06:24:20 pm »
Just had another thought -

These do pass through to the bottom of the car IIRC, so it may just be covered in sh*te under the car which is stopping it coming back through.  If you can locate the underside of it and soak a load of WD40 onto it that may help.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline uk_stu

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 4
  • Posts: 117
    • Email
Re: Threaded bolt head removal....
« Reply #3 on: September 22, 2010, 10:18:35 am »
http://shop.ebay.co.uk/?_from=R40&_trksid=p3907.m570.l1313&_nkw=easy+outs&_sacat=See-All-Categories

Drill a pilot hole then begin to wind the reverse thread easy out down it then hey presto!

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Threaded bolt head removal....
« Reply #4 on: September 22, 2010, 10:56:37 am »
http://shop.ebay.co.uk/?_from=R40&_trksid=p3907.m570.l1313&_nkw=easy+outs&_sacat=See-All-Categories

Drill a pilot hole then begin to wind the reverse thread easy out down it then hey presto!

Only really required if the head on the fixing is destroyed.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline u01atc8

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 135
    • Email
Re: Threaded bolt head removal....
« Reply #5 on: September 28, 2010, 04:31:17 pm »
yes destroyed is the word! lol