Make a donation

Author Topic: aaaarrrgggghhh help  (Read 1271 times)

Offline smithyc1987

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 222
  • 08 Tornado red gti monza 2s and full leather.
    • Email
aaaarrrgggghhh help
« on: September 25, 2010, 09:29:21 pm »
Fitted my forge spacer valve today and like a total dick  :ashamed: overtightend one of the bolts and it snapped.  :mad:
any ideas on what i can do to get it out with out stripping engine to remove the part. have tightend the other 2 bolts and at the moment all is working fine has not lost power and bov noise is awsome. no leaks or anything, would you guys just leave it as there is no current problems.

any input would be appreciated.  :signLOL:

Offline Andy

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 443
  • Posts: 10929
    • Email
Re: aaaarrrgggghhh help
« Reply #1 on: September 25, 2010, 09:41:00 pm »
if the bolt is snapped flush , take the part back of and if you can get a small drill in the space then drill the stud with a colbolt drill 1/8 normally then use theseto get it out