Make a donation

Author Topic: Clutch judder on bite  (Read 15003 times)

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: Clutch judder on bite
« Reply #15 on: September 23, 2010, 09:43:00 pm »
Just to clarify, does the standard GTI have a DMF?

Yes, same

Offline Matthew.

  • Always Involved
  • ****
  • Thank You
  • -Given: 14
  • -Receive: 4
  • Posts: 206
    • Email
Re: Clutch judder on bite
« Reply #16 on: September 23, 2010, 09:44:03 pm »
Ah right, thats releaved some of my concerns then,  :happy2:
2006 Golf GTI - Diamond Black Pearl - Edition 30 Pescaras - Armrest - CD Multi-changer - Colour Coded Rear Valance

Progress thread - http://www.mk5golfgti.co.uk/forum/index.php/topic,65230.new.html#new

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: Clutch judder on bite
« Reply #17 on: September 23, 2010, 09:46:32 pm »
Ah right, thats releaved some of my concerns then,  :happy2:

I remember reading a huge thread on an american site and they all had it too, they fixed it by removing the DMF and fitting a solid item, as said in is thread it's worth fitting the engine mount insert

Offline treesimon

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 2
  • Posts: 46
    • Email
Re: Clutch judder on bite
« Reply #18 on: September 23, 2010, 09:50:46 pm »
Does any one know how easy it is to fit the ecs insert and gaining access etc?
57 plate Tornado red 3dr manual edition 30

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: Clutch judder on bite
« Reply #19 on: September 23, 2010, 10:28:22 pm »
Does any one know how easy it is to fit the ecs insert and gaining access etc?

its a doddle but the car needs to be on axle stands as a minimum :smiley:

Offline treesimon

  • Taking part
  • ***
  • Thank You
  • -Given: 8
  • -Receive: 2
  • Posts: 46
    • Email
Re: Clutch judder on bite
« Reply #20 on: September 23, 2010, 10:37:35 pm »
Does any one know how easy it is to fit the ecs insert and gaining access etc?

its a doddle but the car needs to be on axle stands as a minimum :smiley:

Ok, where's it located?

Is it in the gearbox? Or is it in the gearbox to subframe mount?

Does the OE insert fall out? Press out, etc.

Sorry just trying to get a heads up on it.
57 plate Tornado red 3dr manual edition 30

Offline gazbutS3

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 52
  • -Receive: 55
  • Posts: 3213
    • Email
Re: Clutch judder on bite
« Reply #21 on: September 23, 2010, 10:54:11 pm »
Its in the subframe, at the rear of the lower gearbox mount, the insert firms the std bush up, so you remove the exixting bolt, push the insert in and fit new bolt :happy2:

if you do a search I'm sure there's plenty of pics

Offline john_o

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 136
  • -Receive: 108
  • Posts: 2946
    • My Car Blog
Re: Clutch judder on bite
« Reply #22 on: September 23, 2010, 11:37:26 pm »
Red ED35 5dr DSG
DEFI boost guage / RTech Stg1 Engine/DSG / PPMk7 front brakes
BLOG | BUILD