Rolling Road Meet @ JKM - October 16th - Final List....

[uk_stu]

Sorry i didn't stick around for long, had to wax a caravan!!!

I was the guy in the grey and green stripey hoodie looking lost with a camera! 

Will post the pictures i did take shortly.

[Mandy]

Thanks to Robin for organasing today's event. 

I have posted my results up in the relevant section.

[chungster]

ah damn. thought i got more than yours too lol. not quite 

[Janner_Sy]

Mine made 249.8 and about 290 lb ft peak torque.
HAppy with that.

WOuld be interesting to have a thread with mods and map plus dyno read out to compare cars

you mean like this sticky thread  http://www.mk5golfgti.co.uk/forum/index.php/topic,16977.0.html

[Saint Steve]

Just loaded Vagcom this morning, cleared off the Error codes caused by jkm's rollers, and retried re-installing the Bluefin.It's only loaded without error

Just off for a test drive to see if my missing horsepower has returned

[Hedge]

Just loaded Vagcom this morning, cleared off the Error codes caused by jkm's rollers, and retried re-installing the Bluefin.It's only loaded without error

Just off for a test drive to see if my missing horsepower has returned

 

[Thor]

Just loaded Vagcom this morning, cleared off the Error codes caused by jkm's rollers, and retried re-installing the Bluefin.It's only loaded without error

Just off for a test drive to see if my missing horsepower has returned

Nice one chap, take it easy 

[Hedge]

Talking of taking it easy I have a clip for you. If you like PM me your address and I will stick it through the door, the clip that is.

[Saint Steve]

Well, im gutted to say, i have refound my lost power, been for a quick spin, and all is well.So still dont know what she runs at stage 2!!!!.

Just goes to show, as someone pointed out to me, its what your used too,and you think that nothing is wrong.

If only id cleared the fault codes yesturday, and re-tried installing bluefin, i maywell of had a 2nd run to crack 290+.

The mystery of how the map disapeared, i cannot fathom.

[RedRobin]

The mystery of how the map disapeared, i cannot fathom.

....We'll probably never know for certain but could it be human error somewhere in the course of loading etc etc?

I'm really not a Bluefin hater and think that their user unit looks uber cool but personally I would always be a bit concerned about SC's methods even if down to my own ability to make a mistake in the chain of actions.

[Mandy]

ah damn. thought i got more than yours too lol. not quite 

... almost but not quite, don't forget my cars got issues too...    

You've got a very nice car though. 

[dajonic]

Just to echo everyones comments...thanks to Red Robin for organising and JKM for having us. It was good to meet people and put some faces to names. And too Simon and Neal who had their DV's replaced how was the drive home?
I'm booked back in for a diagnostic run and inspection on the 25th so I'll post up the before and after graphs when the cars sorted!

[S2 Ant]

Ah yeh, i knew i had seen a topic with the mods and power read outs somewhere but couldnt remember if it was this forum or not lol
Cheers for a good day tho and was good to meet a few more people and nosey around some other cars :)

Also thanks to TT for pointing out the urgency of sorting out the chirping under my bonnet!

Oh and one other thing... I mentioned this on the day, i had used VAGCOM to measure the airflow and doing the calculation for power, now by pure fluke im sure, my RR readout was exactly what VAGCOM had predicted with the airflow measured when i logged it a little while back 

Thanks Robin and JKM for sorting all this out 

[ianjmclean]

Just to echo everyones comments...thanks to Red Robin for organising and JKM for having us. It was good to meet people and put some faces to names. And too Simon and Neal who had their DV's replaced how was the drive home?
I'm booked back in for a diagnostic run and inspection on the 25th so I'll post up the before and after graphs when the cars sorted!

Drive home was much more enjoyable than the drive down! The difference is massive now the DV has been replaced. I'd be interested to get back on the rollers at some point and see what it is making. Maybe in conjunction with having a Miltek system fitted.... 

[simonp]

Uh oh, he's on the slippery slope, someone find some spiky shoes quickly!