Make a donation

Author Topic: What bolthead to remove seats?  (Read 1946 times)

Offline big al

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 27
  • -Receive: 93
  • Posts: 2607
    • Email
What bolthead to remove seats?
« on: October 10, 2010, 01:35:13 pm »
Hi guys, anyone got one spare? Or know what the star shaped bolt head size/name/fitment is in order to take out the seats of my GTI?
Only want to use it once, Halfords were not sure if they had any. But if they are expensive, has anyone got one I could just borrow for a bit, and I will post it back once finished with?
Thanks :happy2:

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: What bolthead to remove seats?
« Reply #1 on: October 10, 2010, 01:40:00 pm »
Hi mate, Its a M10 spline bit that you need to remove the seats.

I had to buy a set from halfrauds cost about £20. Handy to have if your got a vag car.

Used mine to do the steering wheel retro aswell.

Lee.
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline big al

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 27
  • -Receive: 93
  • Posts: 2607
    • Email
Re: What bolthead to remove seats?
« Reply #2 on: October 10, 2010, 01:42:09 pm »
Nice one mate, Will have to go over soon to get me a set.

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: What bolthead to remove seats?
« Reply #3 on: October 10, 2010, 01:50:20 pm »
Where are you at? Im in Kent, dont mind lending it to you?
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline monte

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 116
  • -Receive: 134
  • Posts: 2747
  • Global Ruler
    • Deep-Shine Detail. Detailing-Wrapping-Tints. Lincoln.
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,67679.0.html
Re: What bolthead to remove seats?
« Reply #4 on: October 10, 2010, 02:00:11 pm »
They sell em separately at Machine Mart  :happy2: still pricey though :surprised:


Offline big al

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 27
  • -Receive: 93
  • Posts: 2607
    • Email
Re: What bolthead to remove seats?
« Reply #5 on: October 10, 2010, 05:09:48 pm »
Where are you at? Im in Kent, dont mind lending it to you?

Wolverhampton mate. (though if you post it to me, I can send it back 2 days later and stick a couple of £ in to say thanks!)

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: What bolthead to remove seats?
« Reply #6 on: October 11, 2010, 08:55:41 am »
Hi Al,

PM me your adddress and ill get it to you for the weekend mate.

Lee.
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators