LUK flywheel part number

Started by martziniuk, October 22, 2010, 09:57:23 PM

Previous topic - Next topic

martziniuk

Does anyone know the part number of the Gti LUK flywheel and concentric slave? I need LUK number not VAG.
I rang LUK but they insisted they did not do them for the vRS and don't do them for the Gti either  :stupid:
Mk2 Octavia vRS with K04 conversion, 3"TBE & Decat, APR HPFP, BDM Intake, S3 I/C, Sachs clutch & Unicorn custom map, S3 brakes, AP coilovers, THS mounts.

B8.5 Audi S4 with uprated pulley and unicorn Stage 2

martziniuk

No one know?
I believe the flywheel part numbers for the 200bhp GTI is either  415033010 or 415034210
Concentric Slave Cylinder  510007110 or 510010710
No one have a genuine one sat around they can check to see if there is a part number on it?
Would save me atleast £200 over dealer prices from here
http://www.buypartsby.co.uk/index-log-in.php
Mk2 Octavia vRS with K04 conversion, 3"TBE & Decat, APR HPFP, BDM Intake, S3 I/C, Sachs clutch & Unicorn custom map, S3 brakes, AP coilovers, THS mounts.

B8.5 Audi S4 with uprated pulley and unicorn Stage 2

gazbutS3


martziniuk

Thanks, that looks like the one for the S3. The Gti has 3 different flywheels available one I believe is for the ED30 and has the same part number as yours. The other two I aren't sure about.
I rang LUK earlier and asked for the part number for a gti but they needed the last 3 digits from the chassis number, which I don't have cause it's an Octy and they don't supply for Octy's, even though I have checked the hole in the bell housing and sure enough it's a LUK flywheel!!  :confused:
Mk2 Octavia vRS with K04 conversion, 3"TBE & Decat, APR HPFP, BDM Intake, S3 I/C, Sachs clutch & Unicorn custom map, S3 brakes, AP coilovers, THS mounts.

B8.5 Audi S4 with uprated pulley and unicorn Stage 2

martziniuk

Long shot!
Anyone with a 56 or 07 BWA engine code be prepared to pm me the last 3 digits of their chassis and reg number so I could run it by LUK?
Mk2 Octavia vRS with K04 conversion, 3"TBE & Decat, APR HPFP, BDM Intake, S3 I/C, Sachs clutch & Unicorn custom map, S3 brakes, AP coilovers, THS mounts.

B8.5 Audi S4 with uprated pulley and unicorn Stage 2