General > Product Reviews
DEFI Blue Racer 52 mm Boost Gauge / OPOD Mono OSIR pod inc fitting
john_o:
cmdrfire : the gauges are imported anyway so I reckon you could get the metric variant just as easily.
TC : appreciate the comments. you must have taken your nice pills today :P
john_o:
edited to add wiring pic :happy2:
SteveS:
very helpful!
Mark_GTIV:
I had Defi meters fitted to my Subaru WRX with the control box fitted, so you could play back your run, you could read peaks, set audible and visual warnings etc... they were excellent.
As you can see they do support metric versions of the clocks. I had exhaust temp (i had the probe in my downpipe), oil temp and boost. I notice that you can get an enclosure that replaces the air vent on the top of the dash, with something like I had for the WRX.
The whole kit is a little expensive, but if you've made some bigger modifications - these are a must.
I had the control unit discretely mounted under the steering wheel.
xxx_mojo_xxx:
Had my DEFI gauge fitted today...generally pleased with it. Shame that the blue back light doesn't exactly match the OEM blue.
Did anyone figure out how to get the dimming function to work without cutting any wires? Apparently, I need to find a 12V feed from the lighting circuit? For the moment, its set to full illumination which is a bit too bright during the night....
P.S. My gauge peaks at around 21psi... can anyone explain what the inHg and psi values mean?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version