Interesting... mines booked in at JKM this Friday with the same problem... will let you know how it goes. The VCDS shows lean fuel at idle ...
You mean you are seeing a positive percentage in the first value? My value is -0.4%
Not sure what you mean as I'm a bit clueless but this is my readout
004506 - Fuel Pressure Sensor (G247): Malfunction
P119A - 001 - Upper Limit Exceeded
Freeze Frame:
Fault Status: 01100001
Fault Priority: 2
Fault Frequency: 2
Mileage: 44781 km
Time Indication: 0
Date: 2000.00.00
Time: 00:12:18
Freeze Frame:
RPM: 891 /min
Load: 14.1 %
Speed: 6.0 km/h
Temperature: 84.0°C
Temperature: 45.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 13.716 V
001287 - Idle Control System RPM: Higher than Expected.
P0507 - 001 - Upper Limit Exceeded
Freeze Frame:
Fault Status: 01100001
Fault Priority: 2
Fault Frequency: 2
Mileage: 44781 km
Time Indication: 0
Date: 2000.00.00
Time: 00:18:15
Freeze Frame:
RPM: 964 /min
Load: 14.9 %
Speed: 0.0 km/h
Temperature: 84.0°C
Temperature: 13.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 14.351 V
008583 - Bank 1; System too Lean at Idle
P2187 - 004 - No Signal/Communication - MIL ON
Freeze Frame:
Fault Status: 11100100
Fault Priority: 2
Fault Frequency: 1
Mileage: 44781 km
Time Indication: 0
Date: 2000.00.00
Time: 00:13:03
Freeze Frame:
RPM: 838 /min
Load: 14.9 %
Speed: 0.0 km/h
Temperature: 90.0°C
Temperature: 31.0°C
Absolute Pres.: 1000.0 mbar
Voltage: 13.970 V
Readiness: 0000 0000
Saturday,31,January,2009,03:16:51:01199
VCDS Version: Release 805.2
Data version: 20090111