Edition 30 stg1 REVO no other mods : what settings B/T/F ?

[john_o]

ok, the time has come, car will be sporting a new remap soon enough 
no additional modifications just a std Edition 30 , so what settings should it run ?

obviously it will get logged + dyno but for now I just want to know where the limitations are.
I'm assuming Fuel 9 , and a reduced Boost setting as I want to preserve my clutch a little bit.

thanks
John

[gazbutS3]

John i used to run 6 6 9 on stg 1 and made for a lovely progressive power delivery

[Poppa Dom]

I would go with b6t5f9 if you don't have vcds to do some logging.

[gazbutS3]

I would go with b6t5f9 if you don't have vcds to do some logging.

John has vcds Dom

[stealthwolf]

B6 T6 F9 is for a progressive map.
B1 T6 F9 produces 263 bhp
B5 T6 F9 productes 275 bhp

B7 T5 F9 is what Thor ran at.

EDIT: For some reason, I always thought you had a modded car?

[rich83]

I thought that stage one took the ed30 up to 300bhp? Or is that just pub fuelled rumours?

[gazbutS3]

B6 T6 F9 is for a progressive map.
B1 T6 F9 produces 263 bhp
B5 T6 F9 productes 275 bhp

B7 T5 F9 is what Thor ran at.

EDIT: For some reason, I always thought you had a modded car?

he did he's swaping from APR

[stealthwolf]

I thought that stage one took the ed30 up to 300bhp?

Depends on which rollers you run. You could run a stage 1 eddy on two different rollers and get two different results eg 270bhp and 310bhp. Which one are you likely to believe?

[rich83]

I thought that stage one took the ed30 up to 300bhp?

Depends on which rollers you run. You could run a stage 1 eddy on two different rollers and get two different results eg 270bhp and 310bhp. Which one are you likely to believe?

Well... i suppose id take an average... and its not all about 'peak' power anyway!

[SteveS]

i ran mine on b7t5f9 got good results

[rich83]

Are the BTF setting 'end user adjustable'.. or are they set at the time of mapping and left?

[john_o]

cheers guys 

car is back running B6 T3 F9 , as Ive got some 97 RON in the tank from a trip up north at the weekend, so awesome had to peg it back after logging showed excessive CF's
apparently its enough to cause an issue, will go T5/6 once got some more vpower in.

rich , you need to get the SPS handset that allows you to adjust the settings through the OBD port.

[Sunglasses Ron]

969 FTMFW 

[Golfgirl]

Mine is set at T5/B7/F9.

[john_o]

F3 ???? you sure