Phew, glad that's all over
So it turned out to be the DVD drive as some suspected, at least, in that the DVD drive Darren very kindly sent my way, my genuine Version 5 VW maps disc ran in that and re-installed the maps + Nav software and let me change the language from German to English. So it's fixed and I'm all singing and dancing again, just on old maps. TBH, I'll take that
I'm such a pro at taking the dash out now with bubble wrap over the climate controls and RNS screen, I may get a part time job at VW on weekends
So in conclusion, my DVD drive was faulty in not reading the genuine VW discs OR copied discs (all of them
) and my copied discs (all of them it would seem) are all either scratched beyond use, or unreadable for different reasons on good and working drives. We're talking four different DVD discs here, mostly Tesco (or similar brand) DVD-Rs burnt properly at low speed with verification.
What I'm going to try next is purchasing some expensive Sony (or similar) DVD-Rs and burn to these with the v6.1/v7 maps and try this. Perhaps the whole problem all along has been that my drive only reads top quality media and that the discs I have were basically not in a 'fit' state? (
I think one of them is a DVD-RW too, which I understand isn't advised?) That's all I can put it down to.
Many thanks and several beer tokens to
Carl,
Stu and
Darren for all the advice and info on tap
Certainly intend to meet you all at some point this year and there's a pint on me awaiting...
Cheers.
- Oh, and I managed to sort a problem with intermittent speaker switching to only the right and left speaker channels on the MDI channel. Bizarrely, the HDD and SD card functions played music on both speakers happily. This looked like it was a loose connection on the ISO adapter that connects with the back of the RNS510. When holding the RNS while wiggling the back of the ISO connection, it was switching and crossing from left speaker(s) to right, back to right, then both, then right, then left again etc... I did my best to feed the wires back in and put it back in gently, tested it and things seemed fine.