Keano's Edition 30- Update time ;)

Started by keano, November 04, 2010, 06:09:52 PM

Previous topic - Next topic

What to do with alloys?

Keep pescy pescaras
31 (50.8%)
Swap to 'squared' wheels
15 (24.6%)
Get into bed
15 (24.6%)

Total Members Voted: 61

Dan648v

To fit mine and cut pipes start to finish was about 3 hours by myself. Take your time with pipes  :happy2:
Revo Stage 2+ Edition 30 No.1089 with added carbon

keano

Quote from: Dan648v on February 07, 2013, 12:01:02 AM
To fit mine and cut pipes start to finish was about 3 hours by myself. Take your time with pipes  :happy2:

Thanks Dan. Any idea how to mount the horns without the relocation brackets? :(

Dan648v

#632
It's only a little L shaped bracket so you might be able to fashion one up. Ill see if I've got a pic dude. What colour pipes you got?

Just looked and the passenger horn attaches to bracket already there and drivers side using a straight metal bracket. Got a pic of both. Ill post them in here for you when I get a min  :happy2:
Revo Stage 2+ Edition 30 No.1089 with added carbon

keano

Put a little bit of effort into cleaning up the 2nd hand twintercooler.

I never realised what a pain aluminium is to work with!!!

I ended up polishing back the end tanks and top as best I could by hand with brasso and autosol. For the core, I removed as much tarnish as possible, masked off the shiny bits and sprayed with high temp silver paint.

Could be better. Could be worse.  :grin:









final results tomorrow when the paint dries then fitting time :pomppomp: :pomppomp:

rich83

I wouldnt have thought that painting and intercooler was a good idea...

Elliot_C

just read through this whole thread. Stared 11am now 3:04 in the morning  :scared: Such an awesome car, really is!

lol think its bedtime now haha :indifferent:

keano

Quote from: richwig83 on February 10, 2013, 01:03:48 AM
I wouldnt have thought that painting and intercooler was a good idea...

:ashamed: don't worry Richardo, I have read one thread on a supra forum done extensive research into this.

It really is just a thin layer on the front core. I can't see it being a problem, especially with me using BHP paint! It should give me 100 boost powers for the wet bitches.

keano

Quote from: Elliot_C on February 10, 2013, 03:06:55 AM
just read through this whole thread. Stared 11am now 3:04 in the morning  :scared: Such an awesome car, really is!

lol think its bedtime now haha :indifferent:

I'm sorry for your loss Elliot. If there is anything I can do to reimburse you, please let me know!  :happy2:

Ps. Thanks for the compliment and welcome to the forum  :jumpmove: :pomppomp: :booty: :jumpmove: :jumping: :pomppomp:

rich83

Ahhh. You should have said so. The bitches will be wet through in seconds....

Boost squirters!!!

keano

Quote from: richwig83 on February 10, 2013, 08:04:53 AM
Ahhh. You should have said so. The bitches will be wet through in seconds....

Boost squirters!!!


bonelorry

Quote from: richwig83 on February 10, 2013, 01:03:48 AM
I wouldnt have thought that painting and intercooler was a good idea...

Not a problem, We painted the intercooler matt black before I fitted it on my Saab 9-3 Aero project last year.

IAT's where never and issue even after several WOT runs when we where live road mapping the car, Typically on a 10 Degree day the IAT's after the intercooler never went above 18 Degree's :)

It was a 600mm x 300mm x 75mm core I might add!

Cheers

Hedge

The problem with the Twintercooler is the stone chips.  :wink:

Elliot_C

Quote from: keano on February 10, 2013, 08:03:22 AM
Quote from: Elliot_C on February 10, 2013, 03:06:55 AM
just read through this whole thread. Stared 11am now 3:04 in the morning  :scared: Such an awesome car, really is!

lol think its bedtime now haha :indifferent:

I'm sorry for your loss Elliot. If there is anything I can do to reimburse you, please let me know!  :happy2:

Ps. Thanks for the compliment and welcome to the forum  :jumpmove: :pomppomp: :booty: :jumpmove: :jumping: :pomppomp:

Haha Just keep up the awesome work your doing :happy2: :drool:

Thankyou for the welcome  :happy2: :jumpmove: :drinking:


keano

#643
Ba da da da da da daaaaaa! :congrats:






Hedge