Well this is very strange.
I've been out this morning and done a few logging runs with the Traction Control off.
Feck all wrong
Block 115 showed a max of -0.8 correction on any cylinder.
So i tried it with the TC switched back on and hey presto the prob came back, again nothing on the logs. So it seems if the TC kicks in for a split second it doesn't flash on the dash.
It was only in the daylight this morning that i noticed they had re tarmac'd the surface which could explain why it's a bit slippier than normal. Other than that i haven't a clue why it's happening.
But it's not a Coilpack going. Knowing my luck it will be an injector
Thanks for all the replies