Few Updates
New CamShaft65k miles and 2 Cam Followers later, thought it would be a good idea to have a new CamShaft after seeing the state of my CF after just one track day and about 1000 miles.
You can see the damage on the end lobe caused when CF disintegrated previously and hpfp came into contact. Should have changed it the first time but the Shaft looked OK then, cost £255 + 3hrs, gaskets , sealant, @ AMD.
AMD/AS Induction kit with Heat shieldAMD and AS Performance have produced this Induction Kit, looks well thought out, proper heat shield that works well to channel the air through the front grille.
90mm pipe work, 10 colours of Silicone Hose available, with nice smooth flow.
I’ll get some GoPro footage from Goodwood Trackday soon and compare it to the Forge TwinTake I had on before.
http://www.amdtuning.com/news.read.cfm?articleid=3186Millers OilChanged my oil to Millers Nanodrive CFS 10w 50 NT Fully Synthetic.
They claim, for fast road use or track days, for competition or high performance modified engines. Suitable for all normally aspirated and turbo-charged engines from 2 litres upwards, suitable for operating at 125°C with peak temperatures up to 150°C.