Chaps, just looking for a quick head ups.
I've just purchased some genuine Black headlights from Saint Steve (cheers bud) for my GT 2.0 TDI, and will have a go this weekend fitting them. A quick question though as I seem to be getting conflicting advise. Can the headlights be changed without removing the bumper completely ?
My GT is a 2005 model so has the pre-facelift bumper fitted (at the moment) i.e. the Non GTI style. I've taken the corner mouldings off to have a peek inside and "think" I can see the 3rd retaining bolt. Question is though, with the bumper still in place, is there enough room to "wiggle" the headlight out and drop the new one in. A friend told me to half remove the bumper i.e. take out the top 2 screws under the grill and remove the upper 2 screws in each wheel arch, and pull the top of the bumper forward slightly, which he says will give enough acess and clearance to do the job ?
I understand that removing the bumper isn't the end of the world, it's just that I'll be on my own at the weekend, and I'm told removing and replacing the bumper is much easier with 2 people ?
Any advise ? Also, I know that I will need to get them aligned after fitting, but can I assume that as they came off a Golf with them properly adjusted, that the alignment will be "more of less" right straight away and should only need a tweak (just in case I have to run them for a day of so until my local MOT place can book me in) ?
Cheers
Andrew