Make a donation

Author Topic: After Market GTI / GT Sport bumper conversion.  (Read 19686 times)

Offline daboy3000

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 599
  • MKV GT TDi
Re: After Market GTI / GT Sport bumper conversion.
« Reply #15 on: January 04, 2011, 03:06:10 pm »
ok, that sounds ok, is it like the one in my ebay thread further up the thread?  If so I will be super chuffed as it will save me £100

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: After Market GTI / GT Sport bumper conversion.
« Reply #16 on: January 04, 2011, 03:12:37 pm »
ok, that sounds ok, is it like the one in my ebay thread further up the thread?  If so I will be super chuffed as it will save me £100

I fitted the X parts bumper at first but then swapped to the original GTI/GT bumper and splitter was'nt mad about the fit around the lights but its still a good copy!

Just hade to trim it a bit to fit, only cost me £40 and now I can use a different splitter if I want  :happy2:
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline ruffrydaz

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 173
Re: After Market GTI / GT Sport bumper conversion.
« Reply #17 on: January 05, 2011, 12:04:06 am »
Do they look the same apollo?
Did u still use the grills from the xparts?

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: After Market GTI / GT Sport bumper conversion.
« Reply #18 on: January 05, 2011, 11:05:03 pm »
Do they look the same apollo?
Did u still use the grills from the xparts?

Xparts is ok but the splitter as said is not detachable.

No, I have OEM GT Sport main grille and lowers.
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline daboy3000

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 599
  • MKV GT TDi
Re: After Market GTI / GT Sport bumper conversion.
« Reply #19 on: January 28, 2011, 11:00:23 pm »
I fitted the xparts bumper and am very happy with the results, good quality but needed a little trimming

Offline ruffrydaz

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 173
Re: After Market GTI / GT Sport bumper conversion.
« Reply #20 on: January 29, 2011, 12:28:57 pm »
Where did u have to trim it?
im doing mine next week..
Any pics?
« Last Edit: January 29, 2011, 12:31:10 pm by ruffrydaz »

Offline daboy3000

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 599
  • MKV GT TDi
Re: After Market GTI / GT Sport bumper conversion.
« Reply #21 on: January 29, 2011, 04:09:53 pm »
The grills need a little tidying around the edges and where the bumper meets the wing the inside of mine needed a little trim to make it fit flush.  Only minor issues but overall I think it looks very good. The bottom of the bumper or splitter is textured so will need to be smoothed if you want a good finish.

Here's mine, not the best picture as the sun hasn't come out all day!!


Offline ruffrydaz

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 173
Re: After Market GTI / GT Sport bumper conversion.
« Reply #22 on: January 29, 2011, 04:53:55 pm »
How did you attatch the number plate holder from xparts to the grill?
Btw you need to post a pic once the sportlines are fitted, im thinking of getting them on my gt too
« Last Edit: January 29, 2011, 04:58:40 pm by ruffrydaz »

Offline daboy3000

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 599
  • MKV GT TDi
Re: After Market GTI / GT Sport bumper conversion.
« Reply #23 on: January 29, 2011, 05:14:19 pm »
I haven't. Thinking of putting the number plate as low as possible. I didn't get any bolts for the holder from xparts so I thought f*** it, I'll leave it on the dash for now.

Sportslines getting fitted next Sat, keep an eye on my ride page.

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: After Market GTI / GT Sport bumper conversion.
« Reply #24 on: January 29, 2011, 06:34:54 pm »
Looking good Daboy  :happy2:

When I fitted the OEM GTI front bumper I had to cut less of it than the I did the X-parts  :rolleye:

@Ruffrydaz 

Check out my bulid thread, I fitted sportlines last week. Already thinking I want it lower though........

****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline big al

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 27
  • -Receive: 93
  • Posts: 2607
    • Email
Re: After Market GTI / GT Sport bumper conversion.
« Reply #25 on: January 29, 2011, 07:27:15 pm »
I didn't get any bolts for the holder from xparts so I thought f*** it, I'll leave it on the dash for now.

Just be warned that you can get pulled for having  it on your dash.
I would recommend going for the number plate mod that topcat showed a while back which I have copied by putting magnets on the back?
Gives a nice clean look when you want it.

Offline ruffrydaz

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 173
Re: After Market GTI / GT Sport bumper conversion.
« Reply #26 on: March 05, 2011, 06:34:05 pm »
I Need urgent help.
Im trying to fit the xparts as we speak. its not fitting where it meets the wing properly
which bit did u cut exactly

Offline daboy3000

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 599
  • MKV GT TDi
Re: After Market GTI / GT Sport bumper conversion.
« Reply #27 on: March 05, 2011, 06:38:21 pm »
Without seeing what you mean its hard to tell, but it could be inside of the bumper is slightly too big, other than I can't help

Offline ruffrydaz

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 1
  • Posts: 173
Re: After Market GTI / GT Sport bumper conversion.
« Reply #28 on: March 05, 2011, 06:49:13 pm »
so did you only cut where the bumper meets the wing?
was the the bumper you cut or the plastic on the wing
Basically its not flush and sticking out

Offline daboy3000

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 8
  • -Receive: 9
  • Posts: 599
  • MKV GT TDi
Re: After Market GTI / GT Sport bumper conversion.
« Reply #29 on: March 05, 2011, 07:09:01 pm »
I really just had to trim a tiny bit, make sure you have got it fitted right, don't cut any original bits, if you are not sure get a bodyshop to do it