All Things Mk5 > Performance Modifications
improving aerodynamics with OEM parts
Tfsi_Mike:
--- Quote from: Tfsi_Mike on July 24, 2011, 09:50:34 pm ---
--- Quote from: the bruce on January 01, 2011, 07:21:51 pm ---I guess we all agree to this. :wink:
2a & 2b:
left side: 1K0 511 539 E 5,12 €
right side: 1K0 511 540 C 5,30 €
8E0 825 267 0,44 € 4 x
Pease note: little bit tricky to fit !!
--- End quote ---
Think these are them...
--- End quote ---
Also, wonder if I would be much over 50€ as I get tax free over 50 bucks
Richn83:
Thats for the rear arm stone guards mike, the little lumps are these:
Extra lumps 1K0 825 001 B x1
1K0 825 002 B x1
N 909 591 01 fixing kit x4
N 103 546 02 fixing kit x10
the 4 are little push on metal clips to allow the screws to thread into (like you see to hold speakers in place, and 10 are scews with washers. The lumps are about £5 each
This is the rest of what I ordered
Full VW Golf Engine under tray
(x1) 1K0 825 237 P Undertray £26.24
(x3) 1K0 825 951 Hex headed bolt (Combi) 80p each M6X20 hex socket head bolt
Rear axle cover as fitted to VW Golf bluemotion
(x1) 1K0 501 713 D Trim for Rear Axle £25.03 3C0 501 713
(x1) 1K0 501 682 Retaining bracket £1.67
(x1) N 905 483 05 Retaining bolt 47p
(x1) N 901 838 02 Retaining bolt £1.63
Rear arm covers from Audi TT
(x1) 1K0 511 539 E Stone chip Guard £4.69
(x1) 1K0 511 540 C Stone Chip Guard £5.91
(x4) 8E0 825 267 A spreader rivet 10p each
(x2) 1K0 609 734 C brake cable clamp 76p each
(x2) N 102 854 02 Bolt 18p each
Tfsi_Mike:
Right so Ive come away from the dealer with no parts (collect tommorow) and 61euros poorer. Part numbers to follow.
Point to note is the Audi part numbers were available to order.
Got a feeling from your post above Im going to be short of a few clips and screws :(
Tfsi_Mike:
Ordered these;
Richn83:
When you go back tomorrow you will need these to fit them all:
N 909 591 01 fixing kit x4
N 103 546 02 fixing kit x10
(x3) 1K0 825 951 Hex headed bolt (Combi) 80p each M6X20 hex socket head bolt
(x4) 8E0 825 267 A spreader rivet 10p each
you might also need these depending if your rear brake cables are on the top of the rear arms or in the middle like snoopys were.
(x2) 1K0 609 734 C brake cable clamp 76p each
(x2) N 102 854 02 Bolt 18p each
you will only need 4 of the 8E0 spreader rivets not 10 unless thats a random number of fixers.
The 3 bolts are for the main engine tray and hold the rear on the subframe (that holds the bottom engine mount.) the rest of the screws will be holding the existing engine cover in place. did you see the comparison picture of the new and old engine cover did it answer your question above?
With your car being lowered you might see a better improvement as well than mine as you allow less air under the car and having a smaller gap between the car and the ground helps you achieve a better clean flow of air.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version