All Things Mk5 > Performance Modifications
improving aerodynamics with OEM parts
the bruce:
Tank shield is easy on late model Mk.Vs as these already have the thread on the subframe tube.
I'd never fit the center exhaust shield again on a GTI as fitting requirers some cutting on the plastic shield.
Just do engine bay cover + tank/rear axle. :wink:
mkviken:
i have a non resonated system so don't think mine would require much cutting
the bruce:
Ok, I didn't know this. Then it's easy.
djhorace:
Great read - took ages though!
I am going to order the whole kit. I am a little confused at all the part numbers though. I am assuming this is all I need? Is there anything for the Leon Cupra R rear diffuser and side skirts too?
Extra lumps 1K0 825 001 B x1
1K0 825 002 B x1
N 909 591 01 fixing kit x4
N 103 546 02 fixing kit x10
the 4 are little push on metal clips to allow the screws to thread into (like you see to hold speakers in place, and 10 are scews with washers. The lumps are about £5 each
This is the rest of what I ordered
Full VW Golf Engine under tray
(x1) 1K0 825 237 P Undertray £26.24
(x3) 1K0 825 951 Hex headed bolt (Combi) 80p each M6X20 hex socket head bolt
Rear axle cover as fitted to VW Golf bluemotion
(x1) 1K0 501 713 D Trim for Rear Axle £25.03 3C0 501 713
(x1) 1K0 501 682 Retaining bracket £1.67
(x1) N 905 483 05 Retaining bolt 47p
(x1) N 901 838 02 Retaining bolt £1.63
Rear arm covers from Audi TT
(x1) 1K0 511 539 E Stone chip Guard £4.69
(x1) 1K0 511 540 C Stone Chip Guard £5.91
(x4) 8E0 825 267 A spreader rivet 10p each
(x2) 1K0 609 734 C brake cable clamp 76p each
(x2) N 102 854 02 Bolt 18p each
Duke:
Had the front tray fitted this morning. It is a little bit quieter but the main reasons I added it was to stop so much crud getting in underneath and also for stability on track days :)
Not bad for £50 odd fitted.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version