All Things Mk5 > Performance Modifications
improving aerodynamics with OEM parts
Aaron_RJ:
--- Quote from: Richn83 on February 01, 2011, 12:24:44 pm ---
--- Quote from: Snoopy on January 16, 2011, 05:50:53 pm ---Thank you. :smiley:
Engine undertray
1K0 825 237 P Noise Insulation £28.84
1K0 825 951 Hex headed bolt (Combi) 89p (need 3 according to above list)
Rear axle cover as fitted to bluemotion
1K0 501 713 D Trim for Rear Axle £26.73
1K0 501 682 Retaining bracket £1.89
N 905 483 05 Not on Stamm
N 901 838 02 Not on Stamm
Rear covers from A3 or TT
1K0 511 539 E Stone chip Guard £5.37
1K0 511 540 C Stone Chip Guard £6.75
8E0 825 267 a spreader rivet £0.12 (need 4 so x4)
--- End quote ---
What does the rivet go into, that would worry me a bit! (just dont trust myself) and how easy would these parts be to fit on axle stands on a drive as I dont have the luxury of a ramp :sad1:
Also any feedback Aaron?
--- End quote ---
hi sorry for no reply oops
not noticed any difference in consupmtion easy enough to fit on axle stands , the rivets are plastic nd when rear stone guards are fitted the go through the guard and suspension arm and splay out
Snoopy:
Anyone know what the two parts for the axle cover are that i could not find?
Aaron_RJ:
Is a fixing kit you dot need to use It though just use some self tapping bolts m8 thread
the bruce:
I had the bolts from VW, but don't hesitate and use some standard ones.
Just take care it's zink plated or similar.
RedRobin:
--- Quote from: the bruce on February 02, 2011, 10:45:02 pm ---
I had the bolts from VW, but don't hesitate and use some standard ones.
Just take care it's zink plated or similar.
--- End quote ---
....I think stainless steel bolts would probably be best of all.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version