What is the next mod your buying for your car

[big al]

New exhaust, Votex  front splitter, leather recaro retrim, show roof rack, summer wheels, remap, carbon fibre parts for inside.
(In that order I hope, sorry that it's not just one item, im greedy!)

[no golf clubs at all]

Next I'm thinking off ripping off the milly quads and replacing with something a little more subtle. Need a new rear valance, paint and a zorst so this phase doesn't come cheap 

....Just an idea which might be a bit cheaper: Replace just the back box with black satin ceramic coated tips and angle-cut - Like mine. They're less in yer face.

Not a bad suggestion there....I was pretty set on going back to twin (actually even just oem zorst) as modding for increased bhp is not really what I'm after.  It is a big expense though with ed30/r32 rears flying off the shelves at over £200 (even second hand), then paint (£150) then if I keep quads and have the r32 rear a suitable 4 outlet insert. 

I'm probably better just getting an oem rear valance and zorst and painting the insert black. Cheapest option, plus I may be able to sell off my quad milltek and recoup some costs. Decisions decisions :-)

[RedRobin]

^^^^
I assume you already know that the oem R32 rear has cut-outs which allow for all the exhaust configurations: twin, quad, central. You'd just need the appropriate exhaust trim (lower section).

[joesgti]

ebc grooved discs, new pads and fluid, braded hoses, drop it another 15mm (when snow goes and weather starts getting better) wheel refurb, milltek + decat, 

[swf7y]

ebc grooved discs, new pads and fluid, braded hoses, drop it another 15mm (when snow goes and weather starts getting better) wheel refurb, milltek + decat, 

That's an awful lot of 'next mod' 
Sounds good though 

[RedRobin]

ebc grooved discs, new pads and fluid, braded hoses, drop it another 15mm (when snow goes and weather starts getting better) wheel refurb, milltek + decat, 

That's an awful lot of 'next mod' 
Sounds good though 

....Joe is very religious.

[joesgti]

ebc grooved discs, new pads and fluid, braded hoses, drop it another 15mm (when snow goes and weather starts getting better) wheel refurb, milltek + decat, 

That's an awful lot of 'next mod' 
Sounds good though 

ebc grooved discs, new pads and fluid, braded hoses, drop it another 15mm (when snow goes and weather starts getting better) wheel refurb, milltek + decat, 

That's an awful lot of 'next mod' 
Sounds good though 

....Joe is very religious.

should all be done by summer, just bought another house aswell, 

[no golf clubs at all]

^^^^
I assume you already know that the oem R32 rear has cut-outs which allow for all the exhaust configurations: twin, quad, central. You'd just need the appropriate exhaust trim (lower section).

Yeps but when last I looked the exhaust trim options were limited to carbon fibre and as a result quite expensive or are there cheaper versions now available?

I do remember someone on here was selling a cf trim for the quads a good while back but I've completely forgotten who.

[matsu]

New exhaust, Votex  front splitter, leather recaro retrim, show roof rack, summer wheels, remap, carbon fibre parts for inside.
(In that order I hope, sorry that it's not just one item, im greedy!)

greedy?? thats downright insatiable mate..
cant wait for pics
matsu

[Hurdy]

No mods for the Lexus, but the RS3 will be going straight to REVO stage 2 as soon as I get my grubby hands on it. That is....

Intercooler
Stainless exhaust (may wait off on this if I can get hold of a rear bumper that will aloow a dual exit exhaust)
Intake
REVO.

Should give up well over 400 horsies

[danishmkvgti]

No mods for the Lexus, but the RS3 will be going straight to REVO stage 2 as soon as I get my grubby hands on it. That is....

Intercooler
Stainless exhaust (may wait off on this if I can get hold of a rear bumper that will aloow a dual exit exhaust)
Intake
REVO.

Should give up well over 400 horsies

I hope i can get a ride??
Might be my next car when it has a couple of years on it's back. 

[Hurdy]

No mods for the Lexus, but the RS3 will be going straight to REVO stage 2 as soon as I get my grubby hands on it. That is....

Intercooler
Stainless exhaust (may wait off on this if I can get hold of a rear bumper that will aloow a dual exit exhaust)
Intake
REVO.

Should give up well over 400 horsies

I hope i can get a ride??
Might be my next car when it has a couple of years on it's back. 

Quite possibly as I'll be taking it to the 'ring as soon as humanly possible

[Mackie1]

Forge Catch Can and Complete Silicone Hose Kit bought and ready to go on the next dry day. 
Carbon bonnet also ordered... 

My New Year Resolution is that i've really gotta stop spending money on mods 

[Hurdy]

Forge Catch Can and Complete Silicone Hose Kit bought and ready to go on the next dry day. 
Carbon bonnet also ordered... 

My New Year Resolution is that i've really gotta stop spending money on mods 

Ah, if only I had a pound everytime someone broke that resolution

[Mackie1]

Forge Catch Can and Complete Silicone Hose Kit bought and ready to go on the next dry day. 
Carbon bonnet also ordered... 

My New Year Resolution is that i've really gotta stop spending money on mods 

Ah, if only I had a pound everytime someone broke that resolution

It doesnt bode well...i've never kept a New Year Resolution in my life!!