Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Tips for stopping the number plate backing coming away?  (Read 1139 times)

Offline bodger00

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 20
  • Posts: 521
  • A wish called Zonda
Tips for stopping the number plate backing coming away?
« on: January 02, 2011, 05:57:31 pm »
This is a pet hate of mine that every year the number plate backing seems to start to separate. The number plate then looks poor and needs replacing. Does anyone seal them somehow? Perhaps on the edge to stop water ingress?

Logged

Offline 182_blue

  • Global Moderator
  • Just look at my post count
  • *
  • Thank You
  • -Given: 20
  • -Receive: 54
  • Posts: 3373
Re: Tips for stopping the number plate backing coming away?
« Reply #1 on: January 02, 2011, 07:29:38 pm »
Most problem i see come from the drilled holes so i guess sticking them on helps, also when you buy them rub the backs to ensure they are stuck down correctly,  other than that then i would just change them over for new one every so often, they are quite cheap to buy now
Logged

Offline bodger00

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 20
  • Posts: 521
  • A wish called Zonda
Re: Tips for stopping the number plate backing coming away?
« Reply #2 on: January 03, 2011, 10:17:08 am »
Thanks. I stick them on with the adhesive pads so the waters obviously getting in from the sides. I might try a thin layer of silicone sealant around the edge to see if that helps. :driver:
Logged

Offline chip20

  • Always Involved
  • ****
  • Thank You
  • -Given: 35
  • -Receive: 8
  • Posts: 395
    • http://absolutevaletinguk.co.uk/
    • Email
Re: Tips for stopping the number plate backing coming away?
« Reply #3 on: January 03, 2011, 01:23:16 pm »
Drill the plate from the back not the front  :happy2:
Logged
Pages: [1]   Go Up
« previous next »