Make a donation

Author Topic: MFD2 Installation Issues  (Read 1246 times)

Offline York_GTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 125
    • Email
MFD2 Installation Issues
« on: January 01, 2011, 03:27:51 pm »
Hi guys,

I bought an MFD2 headunit from eBay and it arrived a couple of days ago.  I fitted it easily enough and placed the aerial under the speaker grille on top of the dash.

I cannot get a fix on any satelites, despite placing the aerial on top of the dash :confused:

The seller is sending over a new aerial and I will give this a try - is there anything else that I can try if this doesn't work?

Cheers for any help with this!
VCDS Hex-USB +CAN (North Yorkshire)

Carbon Steel Grey 5 door 2010 (60) Golf MK6 GTi DSG / Leather / RCD510 / 18" Monza Alloys

Carbon Steel Grey 3 door 2011 Golf MK6 GTD DSG / RNS510 / Leather (NOW SOLD)

Tornado Red 5 door 2009 Golf MK6 GTi DSG / 18" Monza Alloys / PDT Stage 1 Remap - 261 BHP (NOW SOLD)

Black 3 door 2006 Golf MK5 GTi Manual / 18" Monza Alloys / PDT Stage 1 Remap & HPFP - 262 BHP (NOW SOLD)

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: MFD2 Installation Issues
« Reply #1 on: January 01, 2011, 03:36:19 pm »
Just a thought but look in the gps aerial connector on the unit.

When I got my new RNS I plugged in the GPS aerial and the very fine centre core got bent hence no satellites! When I tried to bend it back straight it obviously snapped off!!!

I used a cut down pin pushed into the centre of the GPS aerial to fix it and it works a treat  :happy2:
« Last Edit: January 01, 2011, 05:58:09 pm by apollo13 »
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline York_GTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 125
    • Email
Re: MFD2 Installation Issues
« Reply #2 on: January 01, 2011, 05:45:55 pm »
Thanks for the tip, I will have a look when the new aerial arrives in the post :happy2:
VCDS Hex-USB +CAN (North Yorkshire)

Carbon Steel Grey 5 door 2010 (60) Golf MK6 GTi DSG / Leather / RCD510 / 18" Monza Alloys

Carbon Steel Grey 3 door 2011 Golf MK6 GTD DSG / RNS510 / Leather (NOW SOLD)

Tornado Red 5 door 2009 Golf MK6 GTi DSG / 18" Monza Alloys / PDT Stage 1 Remap - 261 BHP (NOW SOLD)

Black 3 door 2006 Golf MK5 GTi Manual / 18" Monza Alloys / PDT Stage 1 Remap & HPFP - 262 BHP (NOW SOLD)