Make a donation
« previous next »
Pages: 1 [2]   Go Down

Author Topic: 19"- 8.5j - ET48 - 30mm drop?  (Read 10244 times)

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #15 on: January 03, 2011, 02:15:09 pm »
I'll see if i can get them measured tomorrow  :happy2:
Logged

Over the top mod list ;o)

Offline RedRobin

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 380
  • -Receive: 442
  • Posts: 16627
  • BIALI Motorsport's Chief Horn Blower
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #16 on: January 03, 2011, 02:18:20 pm »
Quote from: apollo13 on January 03, 2011, 12:58:01 pm

Good job my missus has just got a new job working for Michelin......




Sorry but I couldn't resist the opportunity!  :evilgrin:
Logged


On facebook: https://www.facebook.com/robin.procter.50

Throbbin' Red Mk5 GTI DSG with too many mods to list - Have Fun but Safe Journeys!

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #17 on: January 03, 2011, 02:24:33 pm »
Quote from: RedRobin on January 03, 2011, 02:18:20 pm
Quote from: apollo13 on January 03, 2011, 12:58:01 pm

Good job my missus has just got a new job working for Michelin......




Sorry but I couldn't resist the opportunity!  :evilgrin:

Trust you Robin..........although my missus is much better looking than that  :love:   although not as good looking as those wheels!!!  :grin:

@Jake
 Thanks mate, I think I'm sold anyway but the info will be helpful  :happy2:
« Last Edit: January 03, 2011, 02:33:04 pm by apollo13 »
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Dario

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 261
  • booosting... :)
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #18 on: January 04, 2011, 03:18:40 am »
Quote from: apollo13 on January 03, 2011, 09:58:13 am
Dario,

Thanks for the reply, I'v just looked at your build thread!! Amazing work! I see your on KW coils though so not sure on the total drop...

Cheers
Lee

its not all down ,its 45mm now ,it will be all the way down in sping :)
Logged
REVO ST2+ Edition30 -sold

soon 2015 Golf R :)

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #19 on: January 04, 2011, 11:47:53 am »
Quote from: Dario on January 04, 2011, 03:18:40 am
Quote from: apollo13 on January 03, 2011, 09:58:13 am
Dario,

Thanks for the reply, I'v just looked at your build thread!! Amazing work! I see your on KW coils though so not sure on the total drop...

Cheers
Lee

its not all down ,its 45mm now ,it will be all the way down in sping :)

Hmmm...45mm  Whats the rubbing like Dario?
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #20 on: January 04, 2011, 01:05:55 pm »
Quote from: apollo13 on January 03, 2011, 02:06:09 pm
I'm not going to complain about you showing them Jake  :signLOL:

Have you had yours trial fitted mate?

It would help me out if you knew the measurement from the floor to edge of wheel arch, centre of the wheel front and rear?

 :drinking:
Lee.

Front  floor to edge of wheel arch = 620mm
Rear   floor to edge of wheel arch = 654mm

Front center to edge of wheelarch = 314mm
Rear  center to edge of wheelarch = 328mm

 :drinking:
Logged

Over the top mod list ;o)

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #21 on: January 04, 2011, 02:38:19 pm »
Quote from: danishmkvgti on January 04, 2011, 01:05:55 pm
Quote from: apollo13 on January 03, 2011, 02:06:09 pm
I'm not going to complain about you showing them Jake  :signLOL:

Have you had yours trial fitted mate?

It would help me out if you knew the measurement from the floor to edge of wheel arch, centre of the wheel front and rear?

 :drinking:
Lee.

Front  floor to edge of wheel arch = 620mm
Rear   floor to edge of wheel arch = 654mm

Front center to edge of wheelarch = 314mm
Rear  center to edge of wheelarch = 328mm

 :drinking:


Thanks Jake, your a gent   :drinking:

I'll get my tape measure out....
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Dario

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 261
  • booosting... :)
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #22 on: January 04, 2011, 06:43:39 pm »
Quote from: apollo13 on January 04, 2011, 11:47:53 am


Hmmm...45mm  Whats the rubbing like Dario?


rubbing  NO  at this drop ,but on 65mm drop little bit  :happy2:
Logged
REVO ST2+ Edition30 -sold

soon 2015 Golf R :)

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #23 on: January 04, 2011, 07:08:34 pm »
Quote from: Dario on January 04, 2011, 06:43:39 pm
Quote from: apollo13 on January 04, 2011, 11:47:53 am


Hmmm...45mm  Whats the rubbing like Dario?


rubbing  NO  at this drop ,but on 65mm drop little bit  :happy2:

65mm  :grin: I'm not surprised!! Not many speed bumps near you then??............. :signLOL:
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Dario

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 261
  • booosting... :)
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #24 on: January 04, 2011, 07:16:52 pm »
65mm is all way down on KWs and its ok for normal drive ,speedbump  :sick: ,you just find another route  :jumping:
Logged
REVO ST2+ Edition30 -sold

soon 2015 Golf R :)

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #25 on: January 04, 2011, 07:19:16 pm »
Quote from: Dario on January 04, 2011, 07:16:52 pm
65mm is all way down on KWs and its ok for normal drive ,speedbump  :sick: ,you just find another route  :jumping:


I wonder if I can program my RNS510 to avoid all routes with speed bumps........... :signLOL:

Thanks for your help Dario I'll be sure to put some photos on when the better weather gets here  :indifferent:
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Dario

  • Always Involved
  • ****
  • Thank You
  • -Given: 2
  • -Receive: 3
  • Posts: 261
  • booosting... :)
Re: 19"- 8.5j - ET48 - 30mm drop?
« Reply #26 on: January 04, 2011, 07:24:32 pm »
no problem  :drinking:
Logged
REVO ST2+ Edition30 -sold

soon 2015 Golf R :)
Pages: 1 [2]   Go Up
« previous next »