Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Sensor near the top cambelt cover  (Read 1280 times)

Offline robdf2

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 195
    • Email
Sensor near the top cambelt cover
« on: February 03, 2011, 01:33:04 pm »
Hi Guys does anyone know what the sensor is and does that is located (looking at the front of the engine) just under the air box cover on the left hand side next to the cabelt top cover , it goes in at a slight angle.
Had to have the seal replaced because oil was pissing out , just want to know should the sensor be in oil?

Rob.
Logged
2008 Chrono yellow Cupra

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Sensor near the top cambelt cover
« Reply #1 on: February 03, 2011, 08:22:48 pm »
Cam position sensor.
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook

Offline robdf2

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 195
    • Email
Re: Sensor near the top cambelt cover
« Reply #2 on: February 05, 2011, 01:25:40 pm »
thanks alex , is it supposed to be in oil?
Logged
2008 Chrono yellow Cupra

Offline vRSAlex

  • Admin
  • Just look at my post count
  • *
  • Thank You
  • -Given: 39
  • -Receive: 253
  • Posts: 2761
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,19941.0.html
Re: Sensor near the top cambelt cover
« Reply #3 on: February 06, 2011, 04:12:03 pm »
It does sit in oil.   :happy2:
Logged
www.akstuning.co.uk - info@akstuning.com - 01234 822324
Follow AKS tuning on Facebook
Pages: [1]   Go Up
« previous next »