Make a donation

Author Topic: Squeeking tensioner?  (Read 1343 times)

Offline Bane

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 5
  • Posts: 187
  • "I was born a handsome man and now I'm half a goat
Squeeking tensioner?
« on: February 28, 2011, 09:15:34 am »
On starting my Edition30 from cold,theres always a squeeking kind of noise coming from the belts endf of the engine.It normally goes away after the engine has warmwed up a little(about 5-10 mins).
I think it's the tensioner but I'm wondering if there's anything else I should be looking at or is there anything that I need to know about the pulleys/tensioners that may lead to a failure?

Saint Steve

  • Guest
Re: Sqeuking tensioner?
« Reply #1 on: February 28, 2011, 09:16:33 am »
When's the cam belt due for change?

Offline Bane

  • Always Involved
  • ****
  • Thank You
  • -Given: 9
  • -Receive: 5
  • Posts: 187
  • "I was born a handsome man and now I'm half a goat
Re: Squeeking tensioner?
« Reply #2 on: February 28, 2011, 11:50:39 am »
I've just reread my post and I reckon I must have just fallen out of bed when I wrote that! :indifferent:
The cam belt shouldn't be due for a while yet-the cars just gone past 20,000 miles.
It had a main dealer service last October and they did a brake fluid change but never mentioned anything about the cambelt.

Saint Steve

  • Guest
Re: Squeeking tensioner?
« Reply #3 on: February 28, 2011, 01:10:54 pm »
Or 4 years old bane.

Chances are you wont get a failure, just bunko the bushy will get louder over time until the belt/tensioner is replaced.

Offline Adams Cupra

  • Just Arrived
  • **
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 15
    • Email
Re: Squeeking tensioner?
« Reply #4 on: February 28, 2011, 07:18:23 pm »
I put up with mine for about 4 months but then had to get it done as it was getting on my nerves...
Leon Cupra Mk2 2.0TSFi, Revo Stage 2, Blueflame TBE, ITG, Quickshift, H&R Springs