Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Coding required for rcd510?  (Read 2325 times)

Offline parks

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 17
  • Posts: 370
  • Red ED30 No. 1778 Detailing World member
Coding required for rcd510?
« on: February 12, 2011, 08:38:31 pm »
Been searching but haven't found a difinative answer,

Upgrading my original HU for an RCD510, will it require vagcom coding of any sort or just plug and play? I have not got cd changer or iPod input. Already got the latest CANBUS gateway bit (cheers Carl).

Do have MFSW but with midline....

Thanks for any info anyone can give!!
Logged
Standard: Rear parking sensors, Parrot Bluetooth
Retro fitted: MFSW buttons, RCD510, Boot pop, Black Monza II, Xenons, Audi jacking points, open fog light grills.

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Coding required for rcd510?
« Reply #1 on: February 12, 2011, 08:53:02 pm »
There is every chance it'll need some coding yes, it depends on the configuration of the previous car - assuming it's used.
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: Coding required for rcd510?
« Reply #2 on: February 12, 2011, 09:08:04 pm »
As Stu says it will likely need coding. It will work straight away but some of the functionality might not be there if it was used on a car that say for example had highline.

Give me a shout when you have it. :happy2:
« Last Edit: February 12, 2011, 09:09:45 pm by vRS Carl »
Logged

Offline parks

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 17
  • Posts: 370
  • Red ED30 No. 1778 Detailing World member
Re: Coding required for rcd510?
« Reply #3 on: February 12, 2011, 09:36:47 pm »
Cheers carl!

Is it worth me asking the previous owner if they have highline or MFSW?
Logged
Standard: Rear parking sensors, Parrot Bluetooth
Retro fitted: MFSW buttons, RCD510, Boot pop, Black Monza II, Xenons, Audi jacking points, open fog light grills.

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Coding required for rcd510?
« Reply #4 on: February 12, 2011, 09:38:34 pm »
Worth just giving Carl a shout and he'll give it the once over for you.
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline vRS Carl

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 282
  • -Receive: 240
  • Posts: 3088
  • I'm the F.A.G (Forum Apple Guru)
Re: Coding required for rcd510?
« Reply #5 on: February 12, 2011, 09:58:44 pm »
Quote from: parks on February 12, 2011, 09:36:47 pm
Cheers carl!

Is it worth me asking the previous owner if they have highline or MFSW?

Quote from: vRStu on February 12, 2011, 09:38:34 pm
Worth just giving Carl a shout and he'll give it the once over for you.

What he said  :smiley:

Makes no difference what car it's come from I'll just recode it to suit yours :happy2:
Logged
Pages: [1]   Go Up
« previous next »