Author Topic: Clay Bar (Read 1823 times)

james550213 · « **on:** March 16, 2011, 05:50:29 pm »

Hi, just wondering what is the best way to clay bar? watched loads of you tube clips about it, just want your opinion

Thanks James

stealthwolf · « **Reply #1 on:** March 16, 2011, 06:22:12 pm »

Depends. I started off with megs smooth surface clay kit and still use it. I've had good results from sonus green clay bars. Would like to try bilt hamber as this requires only water as lubricant.

Personally don't think there's a superior type of clay bar. Just different grades.

parks · « **Reply #2 on:** March 16, 2011, 06:36:09 pm »

I've used a couple types and seem similar to me. Not a expert, but just started with the megs kit. Easy.

mjt · « **Reply #3 on:** March 16, 2011, 06:49:37 pm »

another

for sonus green just remember lots of lubriant

stealthwolf · « **Reply #4 on:** March 16, 2011, 06:59:17 pm »

The lube I use at the mo is Dodo Juice born to be slippy.

keith · « **Reply #5 on:** March 17, 2011, 07:20:30 pm »

Valet pro do a good clay, can be used with lube or water easy to use and cheap.

VC · « **Reply #6 on:** March 17, 2011, 07:53:10 pm »

Greeners · « **Reply #7 on:** March 17, 2011, 10:22:59 pm »

I saw the thread title and hoped this was in here! I actually

james550213 · « **Reply #8 on:** March 19, 2011, 08:35:19 pm »

Thanks for your advise, hope its nice tomorrow so I can get it done!!

Author Topic: Clay Bar (Read 1823 times)

james550213

Clay Bar

stealthwolf

Re: Clay Bar

parks

Re: Clay Bar

mjt

Re: Clay Bar

stealthwolf

Re: Clay Bar

keith

Re: Clay Bar

VC

Re: Clay Bar

Greeners

Re: Clay Bar

james550213

Re: Clay Bar