Make a donation

Author Topic: standard headlamps to xenon headlamps.....  (Read 4392 times)

Offline patrickcullen87

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 255
    • Email
standard headlamps to xenon headlamps.....
« on: March 03, 2011, 07:12:46 pm »
Iv got a mk5 golf gti dsg with standard lights, iv just bought a set of xenon headlights and was wondering what else i will need to buy for the conversion? auto level adjusters?? also heard i wil need to get some diagnostics done to remove fault codes??? any help would be appreciated.  :smiley:
Admin Notice Sig Removed - Signature images should be no bigger than 450 pixels wide x 150 pixels high

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: standard headlamps to xenon headlamps.....
« Reply #1 on: March 03, 2011, 07:33:19 pm »
Depending on how far you want to go, there are a few choices...

1- get the xenon adapter from kufatec, fit the lights and code the car to Xenon (without shutters)
2- get the xenon adapter with the shutter loom from kufatec, fit the wiring and the lights and code the car to Xenon (with shutters)
3- go the full way and install the auto levelling and headlight washer system, plus the shutter loom from kufatec and code the car to Xenon (with shutters)

'shutters' refers to the xenon high beam. On GTI xenon headlights, they have a halogen 'flash to pass' bulb and, if the headlights are on, a 'shutter' moves on the dipped beam which gives you a xenon high beam as well as the halogen high beam. If you dont wire the shutters in, youll just have a halogen main beam and wont benefit from the xenon high beam

The 2nd option is by far the easiest - thats what I have done on mine

In any case, youll need an adapter and youll need the car recoded to accept the lights


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline Creatz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 15
  • Posts: 475
  • The Noob
Re: standard headlamps to xenon headlamps.....
« Reply #2 on: March 03, 2011, 07:38:13 pm »
oooo  :pomppomp: how much did they set you back,i wouldn't mind some myself

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: standard headlamps to xenon headlamps.....
« Reply #3 on: March 03, 2011, 07:41:13 pm »
enough  :signLOL: :grin:


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline Creatz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 15
  • Posts: 475
  • The Noob
Re: standard headlamps to xenon headlamps.....
« Reply #4 on: March 03, 2011, 07:42:40 pm »
just the lights i want not bothered about the shutters

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: standard headlamps to xenon headlamps.....
« Reply #5 on: March 03, 2011, 07:43:45 pm »
Adapters are 49 euros plus postage for either set, so you might aswell get the shutter loom and do the extra 30 mins work!


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline patrickcullen87

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 255
    • Email
Re: standard headlamps to xenon headlamps.....
« Reply #6 on: March 03, 2011, 07:56:38 pm »
thanks thats a very useful reply! how much did it set u back to get fitted after buying the lights? eg..adaptors etc, did u fit them urself? stupid question but will i have to buy xenon bulbs? lol :ashamed:
Admin Notice Sig Removed - Signature images should be no bigger than 450 pixels wide x 150 pixels high

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: standard headlamps to xenon headlamps.....
« Reply #7 on: March 03, 2011, 10:39:22 pm »
I did it all myself. Where are you based mate?

As long as the headlight set you bought is complete ie bulbs, ballasts and ignitors still fitted, then you wont need any extras par adaptors and some time ;)


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline patrickcullen87

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 255
    • Email
Re: standard headlamps to xenon headlamps.....
« Reply #8 on: March 03, 2011, 11:26:07 pm »
i stay in Denny, just outside Glasgow. i think its just the headlamp itself i bought...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380318958399&ssPageName=STRK:MEWAX:IT
got them off ebay so hopefully a dont need to many parts
Admin Notice Sig Removed - Signature images should be no bigger than 450 pixels wide x 150 pixels high

Offline Creatz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 15
  • Posts: 475
  • The Noob
Re: standard headlamps to xenon headlamps.....
« Reply #9 on: March 04, 2011, 12:12:21 am »
i have a feeling mate what you bought there is just the light housing
and will need the ballast the bulbs and the rest of the kit.

Offline rich83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 165
  • -Receive: 802
  • Posts: 13444
    • MK5 Golf GTI
  • My Ride: https://www.mk5golfgti.co.uk/forum/index.php/topic,19740.0.html
Re: standard headlamps to xenon headlamps.....
« Reply #10 on: March 04, 2011, 12:43:18 am »
If you need ballasts ignitors and bulbs PM me!  :happy2:

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: standard headlamps to xenon headlamps.....
« Reply #11 on: March 04, 2011, 07:15:42 am »
Looking at those, you will need the ballasts bulbs and igniters.

Might be worth PM'ing rich wig  :happy2:


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline patrickcullen87

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 3
  • Posts: 255
    • Email
Re: standard headlamps to xenon headlamps.....
« Reply #12 on: March 04, 2011, 05:35:59 pm »
If you need ballasts ignitors and bulbs PM me!  :happy2:
hey bud, i cant pm people or read my pms yet, must not have been on here long enough, heres my email address tho... paddy_c_uk@hotmail.com feel free to send me a message because i think it is just the housing i will be buyin
Admin Notice Sig Removed - Signature images should be no bigger than 450 pixels wide x 150 pixels high