Make a donation

Author Topic: RNS510 add on's  (Read 3205 times)

Offline Johnny_tro

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 12
  • Posts: 1534
RNS510 add on's
« on: March 24, 2011, 12:06:38 am »
Right,I have recentlybeen playing with my RNS and been looking for add on's.....but something has baffled me......the LOOMS.

Right, I put the following in (MDI) the loom below has the adaptor added on as shown, which is fine.



This is a video in motion lead....again with adaptor on loom



and sooooo on.

My question is, what do you do if you add more than one add on? is there a plug (wiring loom) that has several connectors coming of it for multi attachments?
'VANDALISED' MK5 GT :( - RNS510 H, Bluetooth Armrest, MDI, 50gb hard drive, I can't park  sensors, Cruise Control, Highline Display, MFSW, Heated Seats, Remote Aux Heating System (Heats and Vents) Winter Pack, Heated & Folding Mirrors, Puddle Lights, Xenons, Headlamp Washers, Heated Washers, Auto lights and wipers, LED's, GTI brakes,, black R32 roof lining, Scirocco Rear View, Rear Footwell Lights

Offline Creatz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 15
  • Posts: 475
  • The Noob
Re: RNS510 add on's
« Reply #1 on: March 24, 2011, 12:11:30 am »
I wouldn't use a VIM lead,I have read post of them bricking the head unit.
You can get the VIM lock speed set to 0 mph which then leaves the video running when you drive.
It's all software related on the unit.

Of course you shouldn't be watching tv while driving  :wink: :wink:  :wink:
« Last Edit: March 24, 2011, 09:32:25 am by Creatz »

Offline Johnny_tro

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 25
  • -Receive: 12
  • Posts: 1534
Re: RNS510 add on's
« Reply #2 on: March 24, 2011, 12:13:50 am »
It's for the rear screens chap (VIM)

but mainly it was more used as an example.......i.e what do you do IF you add multi attachments?

If I fit an mdi and then want to fit rear camera and rear screens....? is there one special loom for the WHOLE lot?
« Last Edit: March 24, 2011, 12:15:55 am by Johnny_tro »
'VANDALISED' MK5 GT :( - RNS510 H, Bluetooth Armrest, MDI, 50gb hard drive, I can't park  sensors, Cruise Control, Highline Display, MFSW, Heated Seats, Remote Aux Heating System (Heats and Vents) Winter Pack, Heated & Folding Mirrors, Puddle Lights, Xenons, Headlamp Washers, Heated Washers, Auto lights and wipers, LED's, GTI brakes,, black R32 roof lining, Scirocco Rear View, Rear Footwell Lights

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: RNS510 add on's
« Reply #3 on: March 24, 2011, 07:30:28 am »
It's all about the installation. You've picked items that are sold with plug and play leads for simplicity but you'd need to do a little bit of work to bring all of that together for a neater installation.

The genuine VW MDI retrofit has a better loom.
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline Creatz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 15
  • Posts: 475
  • The Noob
Re: RNS510 add on's
« Reply #4 on: March 24, 2011, 09:31:43 am »
It's for the rear screens chap (VIM)

but mainly it was more used as an example.......i.e what do you do IF you add multi attachments?

If I fit an mdi and then want to fit rear camera and rear screens....? is there one special loom for the WHOLE lot?

ahh right, sorry mate i thought you meant the lead that removed the VIM lock off the front screen.
I know there's a lead you can buy that allows the video to continue while you drive, but has been
known to brick some units.

Offline Sparky Craig

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 135
  • Looking To Sell my R32 :(
    • My R32 Page
    • Email
Re: RNS510 add on's
« Reply #5 on: March 24, 2011, 09:55:46 am »
Not if you spend the d0sh and get good quality items and not from the bAY...

I`ve had mine running for nearly a  year now with NO problems at all... even allows me to switch it back to STOCK if need be my use of the MFSW buttons... :P

Offline Creatz

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 15
  • Posts: 475
  • The Noob
Re: RNS510 add on's
« Reply #6 on: March 24, 2011, 10:01:39 am »
or just remove the VIM lock on the software of the unit like i have,and spend nothing and its the safest option

Offline Sparky Craig

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 5
  • Posts: 135
  • Looking To Sell my R32 :(
    • My R32 Page
    • Email
Re: RNS510 add on's
« Reply #7 on: March 24, 2011, 10:13:05 am »
Bought the VIM module before anyone knew how to do it or have the software  :ashamed: