Make a donation

Author Topic: R32 dials on 1.9tdi  (Read 4065 times)

Offline harryralston

  • Can't Read PM's Yet!
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 5
    • Email
R32 dials on 1.9tdi
« on: March 15, 2011, 02:14:22 am »
Hi everyone ive just bought some r32 dials off ebay for 75 pounds and i am now wanting to put them in my 04 1.9tdi. is this possible and if so is there anyone near sheffield that could do it? thanks

Offline GLIDN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 19
  • Posts: 552
Re: R32 dials on 1.9tdi
« Reply #1 on: March 15, 2011, 03:45:14 am »
it can be done on one provision,

Have a look at your part number of your cluster.
Then have a look at the cluster number you bought.
Basically all the numbers need to be about the same, but the last three digits has to be only 10 difference.

Ie, 368 C will become 378 C

Then it can be fitted.

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: R32 dials on 1.9tdi
« Reply #2 on: March 15, 2011, 06:31:14 am »
As your car is an 04, it will be easy to do with Vag-Commander. What is the part number of the R32 Clocks?  if they end 960, 970, 961, 971, 962 & 972

Then Darren (MortyGTtdi) will be the man to see.

If they end with 3 or 4 then you will need to send them of to a company like shark performance for them to read the pin and reset the mileage
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline tony_danza

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 112
  • Posts: 3013
  • The voice of objective reason, but mine's best.
Re: R32 dials on 1.9tdi
« Reply #3 on: March 15, 2011, 10:38:46 am »
You do realise it isn't going to make your 1.9d suddenly able to do 6750RPM  :signLOL:
Sideways yo!

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: R32 dials on 1.9tdi
« Reply #4 on: March 15, 2011, 10:52:07 am »
Or sound like a throbbing V6. :signLOL:

Offline pobmk4

  • Just Arrived
  • **
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 17
    • Email
Re: R32 dials on 1.9tdi
« Reply #5 on: March 15, 2011, 11:48:45 am »
Do the clocks not just read the normal rpm (although the dash obviously is clocked to more)?? i was thinking of doing this to mine too, but was unsure of what part numbers were compatible with each vehicle!!!

Offline tony_danza

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 3
  • -Receive: 112
  • Posts: 3013
  • The voice of objective reason, but mine's best.
Re: R32 dials on 1.9tdi
« Reply #6 on: March 15, 2011, 11:52:17 am »
I'd imagine things have moved on since I last wired in a rev counter, there'll be some sort of witchcraft in the clocks and a crank position sensor - so I'd imagine it'll read correctly.
Sideways yo!

Offline Hedge

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 484
  • -Receive: 304
  • Posts: 6621
Re: R32 dials on 1.9tdi
« Reply #7 on: March 15, 2011, 03:23:04 pm »
I think Darren has R32 clocks in his GT and I seem to remember him saying they read the correct rpm.

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: R32 dials on 1.9tdi
« Reply #8 on: March 15, 2011, 03:25:34 pm »
They will read the correct rpm but obviously you won't be able to rev the full range  :rolleye:
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline mortygttdi

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 44
  • -Receive: 146
  • Posts: 2370
Re: R32 dials on 1.9tdi
« Reply #9 on: March 15, 2011, 04:19:04 pm »
They will read the correct rpm but obviously you won't be able to rev the full range  :rolleye:

Ya can try but it doesn't sound good :grin:

They work fine, its all electronic now so reads info from ECU and Canbus.

Darren

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: R32 dials on 1.9tdi
« Reply #10 on: March 15, 2011, 04:51:06 pm »
My nan would do it!! She only uses first and second gear  :rolleye:
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: R32 dials on 1.9tdi
« Reply #11 on: March 15, 2011, 05:10:29 pm »
My nan would do it!! She only uses first and second gear  :rolleye:

does she kangaroo too :signLOL:
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: R32 dials on 1.9tdi
« Reply #12 on: March 15, 2011, 05:13:57 pm »
 :signLOL:

Yeah she does!

She's so deaf she can't hear the engine about to blow!!

****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators