Hi, I own vrs 2.0t and need some advice im currently running stage 1 map which seems good. I did a few logs and it seems that car is overfuelling abit high end of rev range and engine is pulling timing back because of this. I considered a fuel pump but after logs it was evident this was not need and if anything a CAI is needed to allow map to perform at best. So my question to you is what kit should I get to give more flow all round bearing in mind price as forge is very expensive to me. My flow maf was peak 190g/s. Which I been told is prob equivelant to around 230-235bhp max using calculation, MAF value, divided by 0.81= the rough Hp @ any point.
