Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: Exhaust rubber bush has torn  (Read 1351 times)

Offline Rob GTI

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 44
  • -Receive: 11
  • Posts: 607
    • Email
Exhaust rubber bush has torn
« on: March 25, 2011, 08:36:22 pm »
Had my car up on the ramp today and noticed this:-




The car has a Milltek TBE and VWR lower rear mount (Fast road), anyone else had any issues of this bush breaking like so, also can this bush be bought on its own? Does it look as if it has been fitted correctly?

Cheers
Logged
GTI Edition 30 No. 907, 3 door, Black. (Now Sold)

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Exhaust rubber bush has torn
« Reply #1 on: March 25, 2011, 08:45:38 pm »
I think you need the whole bracket.
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline bodger00

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 23
  • -Receive: 20
  • Posts: 521
  • A wish called Zonda
Re: Exhaust rubber bush has torn
« Reply #2 on: March 25, 2011, 08:49:42 pm »
This is known to happen with the Milltek. I have heard of this a few times but the replacement part is cheap.
Logged

Offline Rob GTI

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 44
  • -Receive: 11
  • Posts: 607
    • Email
Re: Exhaust rubber bush has torn
« Reply #3 on: March 25, 2011, 10:03:03 pm »
I'm just looking at the close up pic (bottom) one again and it seems the metal underneath the bush is distorted possiblly where someone has used a screwdriver to lever the rubber on the hanger??
Logged
GTI Edition 30 No. 907, 3 door, Black. (Now Sold)

Offline bacillus

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 4
  • -Receive: 451
  • Posts: 6329
Re: Exhaust rubber bush has torn
« Reply #4 on: March 25, 2011, 10:10:03 pm »
Do you have a torque mount insert installed?
iirc RedRobin had a similiar issue with his car and it occured because of engine movement.
Logged
Without traction power is nothing!

Offline Rob GTI

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 44
  • -Receive: 11
  • Posts: 607
    • Email
Re: Exhaust rubber bush has torn
« Reply #5 on: March 25, 2011, 10:42:12 pm »
I've got the VWR lower rear bush which is what RR replaced his insert for so should therefore be better. The VWR bush was fitted before the Milltek even!!
Logged
GTI Edition 30 No. 907, 3 door, Black. (Now Sold)

Offline pobmk4

  • Just Arrived
  • **
  • Thank You
  • -Given: 2
  • -Receive: 0
  • Posts: 17
    • Email
Re: Exhaust rubber bush has torn
« Reply #6 on: March 25, 2011, 11:33:16 pm »
Ive seen this happen with a couple of GTi's, both had millteks fitted - i think its actually a problem with the length of the mounting arms - they are slightly longer than a standard exhaust - but i'd have thought the uprated bushing would have helped due to the lack of movement!!
Logged
Pages: [1]   Go Up
« previous next »