Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: RCD310 Help required  (Read 1621 times)

Offline GLIDN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 19
  • Posts: 552
RCD310 Help required
« on: April 01, 2011, 05:03:57 am »
Ok I installed a RCD310 into my 2005 Golf GTI finally.

The little issue I'm having is the following.

Sometimes the radio turns on and off correctly from the key. Other times I have to manually turn the radio on after car has been started, or turn the radio off after the key has been removed.

So do I need to make any changes in the CAN-BUS, to allow for the new radio?
or are the CAN-BUS cables swapped around in the mk6?
I have not yet checked which revision CAN-BUS Gateway I have. Otherwise I have to get new newer CAN-BUS I'm assuming.

Any help would be appreciated.

Thanks
Logged

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: RCD310 Help required
« Reply #1 on: April 01, 2011, 06:16:35 am »
Hi
you need a new Can Gateway or you will have a flat battery
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline GLIDN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 19
  • Posts: 552
Re: RCD310 Help required
« Reply #2 on: April 01, 2011, 06:45:46 am »
Quote from: Eddie-NL on April 01, 2011, 06:16:35 am
Hi
you need a new Can Gateway or you will have a flat battery

I know that one. Thanks for that.
I use the car everyday. So not too worried about that.

More worried about above mention issue.
Logged

Offline Eddie-NL

  • Trader - 2014
  • Just look at my post count
  • *
  • Thank You
  • -Given: 0
  • -Receive: 298
  • Posts: 2639
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,56721.0.html
Re: RCD310 Help required
« Reply #3 on: April 01, 2011, 06:04:40 pm »
changing to a newer gateway should solve your problem
Logged
Genuine VCDS VAG-COM HEX-USB + Genuine Vag Commander + Genuine VAG Tacho + Genuine VAG CAN PRO  + RNS Manager for Video in Motion and New Pin Code for RNS510


Cluster and Key coding

Location Great Yarmouth


Retrofits fitted by me see my members rides

Offline GLIDN

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 12
  • -Receive: 19
  • Posts: 552
Re: RCD310 Help required
« Reply #4 on: April 01, 2011, 11:06:18 pm »
Ok, remembered what I had done. Duh

I had to run an aftermarket radio for the past 9 months. Got annoyed with the radio comm error everytime I scanned the car.

So I disabled the radio coding in the can-bus. That is why I was having this issue.

Thanks for your help.
Logged
Pages: [1]   Go Up
« previous next »