RR Lotto

[boxxer1973]

Just got back from ~TSR in bridgwater

car is stage 1 revo got 238bhp and 270 lbft tsr were concerned as this was low , car still seems to pull fine what are you guys getting stage 1 ?

[Saint Steve]

Sounds about right for a stage 1 K03 Gti 

[Janner_Sy]

that is bang on for a stage 1 car.  Mine made 240hp/2790lbft with shark performance and 241hp/249lbft with bluefin.

oDont get hung up over these cars with 255hp at stage 1, because they dont have that at all, they have inaccurate results

[Homer]

I was told by a revo dealer that it goes up to 255 hp, are you guys saying this is actually not accurate?

[Saint Steve]

I was told by a revo dealer that it goes up to 255 hp, are you guys saying this is actually not accurate?

 

unless you support other mods to get this figure, ie intake and Full TB exhaust, you simply are not gonna get to the 255bhp they quote with just a simple remap alone  .

[stealthwolf]

There are different ways to set up a rolling road and these variations mean you can get silly figures. I've heard of people making 230bhp on a stock GTI (that should be 200bhp!).

Ideally you should do a before and after run on the same rolling road to measure the increase in bhp.

[Janner_Sy]

yes.  Ive seen probably in excess of 10+ cars with revo stage 1 make 235-245hp.

If you want 255hp take a trip up to AMDtechniks or superchips roller.  Awesome GTI's rollers make some big figures as well.

what dyno did they have?

as saintsteve says.  an intake is good for 10hp, so if you added that to your stage 1 you could be looking at 248hp

[boxxer1973]

as ive said its a rr lotto. I am happy how the car drives  ,just TSR gave it a extra power run hoping for more power. more a enquiry than a grizzle

[PDT]

Mine made 240hp/2790lbft with shark performance

How long did the clutch last  

[boxxer1973]

PDT why would this make an effect on the clutch?

2790lbft would stop the earth spinning 

[Janner_Sy]

haha

the best bit is he has deleted his post after realising his error, bnut your quote still shames his post

it was 270lbft btw

[Homer]

yes thanks Janner ya git! I was hoping I could delete it before too much discussion but that damned quote!!

[Homer]

and hold on a minute its was your orginal quote which caused the madness so lets re-quote it below 

"Mine made 240hp/2790lbft with shark performance"