Make a donation

Author Topic: Best product for Mini Engine detail?  (Read 1969 times)

Offline cossy

  • Always Involved
  • ****
  • Thank You
  • -Given: 17
  • -Receive: 4
  • Posts: 250
  • 57 REG ED30 5325 MILES!
Best product for Mini Engine detail?
« on: March 06, 2009, 06:49:08 pm »
Just wondering what you guys would recommend.

Not looking to get the tooth brush out, but removal of dust and general clean of the engine covers, plastics etc. :wink:

Offline stealthwolf

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 306
  • -Receive: 291
  • Posts: 7836
  • ED30 No.1412
    • Email
Re: Best product for Mini Engine detail?
« Reply #1 on: March 06, 2009, 07:15:12 pm »
WD40 and a cloth.

The GTI isn't just a machine. It's very much a living, breathing thing.

Offline cossy

  • Always Involved
  • ****
  • Thank You
  • -Given: 17
  • -Receive: 4
  • Posts: 250
  • 57 REG ED30 5325 MILES!
Re: Best product for Mini Engine detail?
« Reply #2 on: March 06, 2009, 07:26:03 pm »
You serious?

Thought it would attract dust to stick to it?

Offline Top Cat

  • Top cat
  • Just look at my post count
  • ******
  • Thank You
  • -Given: 171
  • -Receive: 335
  • Posts: 8196
  • Almost Jacamo
Re: Best product for Mini Engine detail?
« Reply #3 on: March 06, 2009, 07:44:02 pm »
I just use a brush like this http://www.envyvaleting.co.uk/products_info.asp?id=151  just a cheap one though from a art shop.  :smiley:
Every fourth wash of the car with some, autoglym usual car shampoo, this doesnt soap up as much . then rinse with water using the same brush, then dry off carefully with cheapo micro fibre cloths.
If you want to put products on after that for the plastics then i would say use your favourite plastic trim stuff.  :happy2:

Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Re: Best product for Mini Engine detail?
« Reply #4 on: March 08, 2009, 10:04:22 pm »
any all purpose cleaner to take off the rubbish...

i use either Meguiars Super Degreaser or Megs All Purpose cleaner.

Cut 1:4. spray it on, leave it for 5 mins or so. Then clean all the areas off you can carefully with a good brush and a microfibre wash mitt.

then rinse off. let it dry for 20 mins or so.

then something like 303 aerospace protectant will do the trick for dressing.

spray it on, leave for 5 mins and then wipe completely dry with a microfibre! ;)

Offline JPC

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 93
  • -Receive: 111
  • Posts: 6222
Re: Best product for Mini Engine detail?
« Reply #5 on: March 08, 2009, 10:04:54 pm »
by the way..do this at your own risk and be careful around electrical areas and alternator etc