Make a donation
« previous next »
Pages: [1] 2 3 4   Go Down

Author Topic: Which CAN do I need for RNS510 C  (Read 12360 times)

Offline DaveR77

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 187
    • UK-MKIVS.net
Which CAN do I need for RNS510 C
« on: April 26, 2011, 01:42:53 pm »
I've just put a deposit down on an Edition 30 (Jan 2007) and want to buy an RNS510 version C. I assume my car will need a newer CAN to avoid any problems, which version should I get
Logged

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: Which CAN do I need for RNS510 C
« Reply #1 on: April 26, 2011, 01:50:15 pm »
this one is the newest one on ebay.de atm, but i have the AH revision (made in march 2010)

http://cgi.ebay.de/Audi-Steuergerat-Gateway-1K0-907-530-AF-Gateway-Temic-/130504976331?pt=Autoteile_Zubeh%C3%B6r&hash=item1e62b3e7cb
Logged

Over the top mod list ;o)

Offline DaveR77

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 187
    • UK-MKIVS.net
Re: Which CAN do I need for RNS510 C
« Reply #2 on: April 26, 2011, 01:55:03 pm »
cheers, is L the lowest needed for the RNS, best check what I have first before ordering a new one!
Logged

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: Which CAN do I need for RNS510 C
« Reply #3 on: April 26, 2011, 02:31:09 pm »
K is the lowest needed not L, though not all Ks are suitable.

Its likely yours will already have a K

Youll need to scan your CAN Gateway with VCDS and post up the SW and HW revisions of it.

Mine had a K and it was absolutely fine.
Logged


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: Which CAN do I need for RNS510 C
« Reply #4 on: April 26, 2011, 02:34:39 pm »
Quote from: alexperkins on April 26, 2011, 02:31:09 pm
K is the lowest needed not L, though not all Ks are suitable.

Its likely yours will already have a K

Youll need to scan your CAN Gateway with VCDS and post up the SW and HW revisions of it.

Mine had a K and it was absolutely fine.

I had a K in mine and it wasn't fine  :wink:
Logged

Over the top mod list ;o)

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: Which CAN do I need for RNS510 C
« Reply #5 on: April 26, 2011, 02:35:12 pm »
What build month was yours danish?
Logged


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: Which CAN do I need for RNS510 C
« Reply #6 on: April 26, 2011, 03:23:44 pm »
Quote from: alexperkins on April 26, 2011, 02:35:12 pm
What build month was yours danish?

12 month 2005  :smiley:
Logged

Over the top mod list ;o)

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: Which CAN do I need for RNS510 C
« Reply #7 on: April 26, 2011, 03:26:39 pm »
Ah early then

2007 cars are generally ok on a K  :happy2:
Logged


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline RagingKileak

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 191
Re: Which CAN do I need for RNS510 C
« Reply #8 on: April 26, 2011, 03:28:35 pm »
I'm also wondering about this whole CAN Gateway thing. I have a 2007 Ed 30 (dunno what build or exact month as I am at work) and I want to be sure I won't get stupid issues following fitting BT and RNS510 etc.

Don't have any way of scanning though, sigh.

Where does the CAN Gateway live? Is it a DIY swap or need coding/hard to locate?

Cheers
Matt
Logged

Offline DaveR77

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 187
    • UK-MKIVS.net
Re: Which CAN do I need for RNS510 C
« Reply #9 on: April 26, 2011, 03:31:18 pm »
Right, bought the RNS, i'll give it a go before changing the CAN
Logged

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: Which CAN do I need for RNS510 C
« Reply #10 on: April 26, 2011, 03:32:14 pm »
Can Gateway is hidden behind the relay/fuse box.

Accessible by removing the wiper motor and the access panel beneath it
Logged


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline Resonance

  • Always Involved
  • ****
  • Thank You
  • -Given: 20
  • -Receive: 2
  • Posts: 92
  • ED 30 Steel Grey DSG
    • Email
Re: Which CAN do I need for RNS510 C
« Reply #11 on: April 26, 2011, 05:30:06 pm »
Quote from: DaveR77 on April 26, 2011, 03:31:18 pm
Right, bought the RNS, i'll give it a go before changing the CAN

My eyes are stuck to this thread, I have a Feb 2007 Edition 30 and want to upgrade to a RNS510 at some point and this thread should answer my question about the CAN gateway issues  :laugh:
Logged

Offline vRStu

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 90
  • -Receive: 159
  • Posts: 2562
    • Octavia-vRS Information Resource
Re: Which CAN do I need for RNS510 C
« Reply #12 on: April 26, 2011, 05:38:24 pm »
Quote from: alexperkins on April 26, 2011, 03:32:14 pm
Can Gateway is hidden behind the relay/fuse box.

Accessible by removing the wiper motor and the access panel beneath it

Do you take the back wheels off when you top up the oil or is it just CAN gateways you like to take your time over  :evilgrin:

The Gateway is accessible from inside the car.  :happy2:
Logged
Stu...

Quartz Grey Audi A4 3.0 TDi S-Line Quattro, 7 Speed S-Tronic, 19" Twin Spoke Alloys, Alcantara Upholstery with Silver Stitching and Heating, Sat Nav High, B & O Sound, Audi Music Interface, DAB Radio, Parking Advanced with Rear View Camera, Advanced Keyless Entry, LED Interior Light Pack, Hill Hold Assist, Heated and Electrically Folding Mirrors, Through Load.

RNS510 Video in Motion unlocking, PIN recovery & DVD Region Free available

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: Which CAN do I need for RNS510 C
« Reply #13 on: April 26, 2011, 05:39:47 pm »
Quote from: alexperkins on April 26, 2011, 03:32:14 pm
Can Gateway is hidden behind the relay/fuse box.

Accessible by removing the wiper motor and the access panel beneath it

Or just get to it above the pedals.....

Unless you have an early car and then they're sometimes behind the ashtray/cubby area.

EDIT-Stu beat me to it  :signLOL:
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline DaveR77

  • Always Involved
  • ****
  • Thank You
  • -Given: 10
  • -Receive: 3
  • Posts: 187
    • UK-MKIVS.net
Re: Which CAN do I need for RNS510 C
« Reply #14 on: April 26, 2011, 05:49:57 pm »
Quote from: Resonance on April 26, 2011, 05:30:06 pm
Quote from: DaveR77 on April 26, 2011, 03:31:18 pm
Right, bought the RNS, i'll give it a go before changing the CAN

My eyes are stuck to this thread, I have a Feb 2007 Edition 30 and want to upgrade to a RNS510 at some point and this thread should answer my question about the CAN gateway issues  :laugh:

I'll let you know, probably won't get the unit til next week thanks to the wedding so i'll fit it next weekend
Logged
Pages: [1] 2 3 4   Go Up
« previous next »