JKM Rolling Road Day

[RedRobin]

so who made what numbers today then??? 

....Phil put Bourbons in his tank! Wow!!

[Phil Mcavity]

yes and what a way to waste a good Buscuit!

[bacillus]

Is there a list of results for this RR day?

To RR, did you see any difference in hp/torque after having your fuel mixture richened?

[RedRobin]

To RR, did you see any difference in hp/torque after having your fuel mixture richened?

....No difference whatsoever in my bhp/torque but my AFR is now absolutely spot on what it should be and flatlines for the whole range so I'm very happy.

240bhp on the day and she's been between 236 and 242 for the last few dyno-days and the curves remain smooth and well shaped as previously. So basically she's in fine tune and good health and extremely driveable.

It'll be interesting to see what the Superchips rollers plot at the forum meet in June.

[SteveP]

^^^ Higher than the JKM DD ones that's for sure 

[RedRobin]

^^^ Higher than the JKM DD ones that's for sure 

....That's certainly the expectation but I'll be far more interested in the curve shapes which SC plot.

[SteveP]

Mine where pretty much 100% the same on both JKM's DD rollers and SC's MaHa LPS3000's 

You can also get some more logging data from the MaHa rollers as well such as timing, fueling and some other bits and bobs 

[RedRobin]

....

Steve, you seem to be contradicting yourself : -

^^^ Higher than the JKM DD ones that's for sure 

Mine where pretty much 100% the same on both JKM's DD rollers and SC's MaHa LPS3000's 

....Ideally it would be great if JKM's and SC's rollers plotted more or less the same.

You can also get some more logging data from the MaHa rollers as well such as timing, fueling and some other bits and bobs 

....JKM have loads of logging data too if required.

[SteveP]

....
Steve, you seem to be contradicting yourself : -

^^^ Higher than the JKM DD ones that's for sure 

Mine where pretty much 100% the same on both JKM's DD rollers and SC's MaHa LPS3000's 

My response was in relation to your point about the curve shapes.

You can also get some more logging data from the MaHa rollers as well such as timing, fueling and some other bits and bobs 

....JKM have loads of logging data too if required.

I did not say they didn't, I was referring to the capabilities of the Maha Roller SC operate, as logging like this isn't available as part of the normal RR days JKM operate. 

[RedRobin]

My response was in relation to your point about the curve shapes.

.... That doesn't make sense. The curves/shapes are a direct reflection/manifestation of the numbers. Higher curves = Higher numbers. We must be misunderstanding each other.

You can also get some more logging data from the MaHa rollers as well such as timing, fueling and some other bits and bobs 

....JKM have loads of logging data too if required.





I did not say they didn't, I was referring to the capabilities of the Maha Roller SC operate, as logging like this isn't available as part of the normal RR days JKM operate. 

....If you mean that data logs aren't automatically given to the customer on a Dyno-Day, then no. But AFAIK the info is all there - I've spent time with JKM examining logs and so has illyun (more than anyone else probably!!).

However, Maha's have an awesome reputation for accuracy (if any rolling-road can have!).

[illyun]

I've spent time with JKM examining logs and so has illyun (more than anyone else probably!!).

I know, don't remind me... 

[JKM]

Hi All,

Thanks to everyone who turned up on Saturday. Great to see both new and old faces.

Results are up on the web.

http://www.jkm.org.uk/performance/GalleryMK5GTI180309.htm

Kind Regards
Kate 

[Poppa Dom]

Hi Kate,
Thanks for hosting a great RR session - was good to touch base with new friends.

Dom