All Things Mk5 > Superchips Zone
Bluefin Stage 2
heavyd:
just send him a pm with your logs, Im sure he'll get back to you
martziniuk:
Steve looking at the logs, my opinion is I see you have a big spike @ 2960 rpm which would use a lot of fuel to create the power from that spike. Fuel pressure slowly catches up later in the rev range as the boost curves drops to follow what it should. As its stage 2 and on the limits of the pump it would take a while for the pressure to build back up again before running out of fuel at higher rpm.
Just my opinion.
vRStu:
I wouldn't agree that Stage II doesn't need a higher flowing fuel pump. It can be seen from your logs Steve that Req'd vs Actual is quite different in some places.
I don't think simply changing the follower is the answer to your issue, tone down the map or invest in a fuel pump :evilgrin:
Saint Steve:
My map has been now toned down, but sifting through my service receipts, it appears my fuel filter nxt to the fuel tank has never been inspected :fighting:.Filter and follower are next to try.
new map from Superchips has already by my bum dyno feel smoother on fly up, so fingers crossed.
Will re-log to confirm once replaced .
martziniuk:
I replaced my fuel filter last night after 100k, OMG their was a lot of brown muck which came out with the petrol.
It is certainly something I would change every 50k at most.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version