Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: That was hard work....  (Read 1074 times)

Offline johnhol78

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 25
  • -Receive: 6
  • Posts: 579
    • Email
That was hard work....
« on: May 14, 2011, 07:10:21 pm »
OMG.

Thought I'd remove the pre cat and after reading threads on here it seemed pretty straight forward.

Try to get the exhaust out the mid section joint was a nightmare - especially with the car up on little ramps.

Took me 3 hours and several cuts, bruises and aches though it starts  :grin:

Haven't been out as I'm battered now though after revving it the first time it did have a little pop  :evilgrin:

Revved it a bit more and all seemed good.

Might go for a run later and see what's what.

Again, great help from the forum and a valuable resource for GTi owners.... :happy2:
Logged

Offline 56OctyVRS

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 39
  • -Receive: 72
  • Posts: 1003
Re: That was hard work....
« Reply #1 on: May 14, 2011, 07:15:17 pm »
Nice one :happy2:

I removed the pre cat from my Octy VRS and it makes a big difference to the spool up.  Plus the EGST will not be as high and the turbo will operate a bit cooler.  Next plan is to remove the centre box and place a straight through pipe for a bit of extra noise :evilgrin:
Logged
Frozen White Ford Focus 1.6 Ecoboost Titanium.
Mods so far - Superchips Bluefin, High Flow Air Box

Offline johnhol78

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 25
  • -Receive: 6
  • Posts: 579
    • Email
Re: That was hard work....
« Reply #2 on: May 14, 2011, 07:16:09 pm »
Quote from: 56OctyVRS on May 14, 2011, 07:15:17 pm
Nice one :happy2:

I removed the pre cat from my Octy VRS and it makes a big difference to the spool up.  Plus the EGST will not be as high and the turbo will operate a bit cooler.  Next plan is to remove the centre box and place a straight through pipe for a bit of extra noise :evilgrin:

Same here, looking at have a switchable cat/decat.....just going to get a quote.
Logged

Offline johnhol78

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 25
  • -Receive: 6
  • Posts: 579
    • Email
Re: That was hard work....
« Reply #3 on: May 14, 2011, 09:02:28 pm »
Massive improvement....absolutely over the moon with the difference. Quicker, feels lighter.. :confused:

No real change in the sound though slightly more tappety on tickover....

Happy  :happy2:
Logged
Pages: [1]   Go Up
« previous next »