Make a donation
« previous next »
Pages: [1]   Go Down

Author Topic: RNS fitting in Kent  (Read 2345 times)

Offline markevo6

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 4
  • Posts: 63
    • Email
RNS fitting in Kent
« on: May 05, 2011, 08:10:01 pm »

Hi ,

Just purchased an RNS - Version C to replace the MFD2 in my 06 Gti.

Is there a recommended company in Kent that can fit it for me , or someone that does installs off the forums maybe.

I'll also need to update the canbus I believe so still have to get one of those.

Any advice would be greatfully received.

Thanks

Mark
Logged

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: RNS fitting in Kent
« Reply #1 on: May 05, 2011, 08:15:40 pm »
If i was in kent Mark I would come and lend a hand but im a little further away in Poole!

as for a canbus, http://cgi.ebay.co.uk/CANGATEWAY-1K0907530AA-CAN-GATEWAY-RNS-510-RCD-510-/170601532805?pt=UK_AudioTVElectronics_GPSSystems_GPSSystems&hash=item27b8a4cd85#ht_3131wt_1141 I got my new one from that link, and it was in fact newer than the one they listed!

Offer £65 and they should take it  :happy2:
Logged


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline roamer1711

  • Always Involved
  • ****
  • Thank You
  • -Given: 13
  • -Receive: 2
  • Posts: 93
Re: RNS fitting in Kent
« Reply #2 on: May 05, 2011, 11:09:00 pm »
Fitting is as easy as this, the CAN will need coding, have a look on the VAGCOM part of the forum some one will be near you.



shows how the trim comes off
Logged
Went in for a Landy came out with a GTI, mid life crysis? me :-)

Offline james

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 6
  • -Receive: 19
  • Posts: 594
Re: RNS fitting in Kent
« Reply #3 on: May 07, 2011, 10:38:06 am »
mate, i am in margate, i can do it for you pm me  :happy2:
Logged

Offline parks

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 17
  • Posts: 370
  • Red ED30 No. 1778 Detailing World member
Re: RNS fitting in Kent
« Reply #4 on: May 07, 2011, 10:42:48 am »
Where abouts in Kent?
Logged
Standard: Rear parking sensors, Parrot Bluetooth
Retro fitted: MFSW buttons, RCD510, Boot pop, Black Monza II, Xenons, Audi jacking points, open fog light grills.

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: RNS fitting in Kent
« Reply #5 on: May 07, 2011, 09:18:33 pm »
I'm in Rainham if you need anyone  :happy2:
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline markevo6

  • Always Involved
  • ****
  • Thank You
  • -Given: 6
  • -Receive: 4
  • Posts: 63
    • Email
Re: RNS fitting in Kent
« Reply #6 on: May 08, 2011, 06:14:14 pm »


I'm in Paddock Wood , I think Apollo is closest to me ( Rainham ) and would be fantastic to get it done - will drop a Pm when everything has turned up.

Just ordered a new canbus from one of the earlier links so should have that next week some time hopefully.


Thanks to everyone for all the usefull and good advice , such a great site this .


 :happy2:

Cheers Mark
Logged

Offline apollo13

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 2
  • -Receive: 47
  • Posts: 1017
Re: RNS fitting in Kent
« Reply #7 on: May 10, 2011, 10:19:30 pm »
Just let me know when your sorted mate and we'll get it done for you  :happy2:
Logged
****Registered VCDS HEX CAN Kent Area For All Retrofits**** GT TDI - Retro fitted by me so far.... OEM Omanyts - Sportlines - GT Sport Front End - GTI Rear and Skirts - Hella Dynabeam Xenons - Heated Leather - Highline Cluster With White LED's and Lit Needles - Armrest - Mk6 GTI MFSW - Skyline OEM LED Tailights - LED RNS 510 With Voice Control - Rear Sensors - 729B Bluetooth - Highline CCM + CECM - AF CAN Gateway - Cornering Fogs - U.S Indicators

Offline janus909GTI

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 1
  • Posts: 228
    • Email
Re: RNS fitting in Kent
« Reply #8 on: May 18, 2011, 05:22:54 pm »
Quote from: alexperkins on May 05, 2011, 08:15:40 pm
If i was in kent Mark I would come and lend a hand but im a little further away in Poole!

as for a canbus, http://cgi.ebay.co.uk/CANGATEWAY-1K0907530AA-CAN-GATEWAY-RNS-510-RCD-510-/170601532805?pt=UK_AudioTVElectronics_GPSSystems_GPSSystems&hash=item27b8a4cd85#ht_3131wt_1141 I got my new one from that link, and it was in fact newer than the one they listed!

Offer £65 and they should take it  :happy2:

Alex....im in Bristol, you reckon if i get the equipment in you could help me out?? ive got an 05 gti so am guessing i would need to upgrade the cambus as well? and also have it coded in which i wouldnt have a clue how to do?!
Logged

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: RNS fitting in Kent
« Reply #9 on: May 18, 2011, 06:59:25 pm »
Of course mate wouldnt be a problem

If you were to get an RNS510, youd definately need a can gateway upgrade. PM me and we can discuss
Logged


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.
Pages: [1]   Go Up
« previous next »