Make a donation

Author Topic: Can I use an RNS 510 rev C with this CAN module?  (Read 1237 times)

Offline _Nathan_

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 85
    • Race Data Systems - Motec Cosworth Aim Racelogic
Can I use an RNS 510 rev C with this CAN module?
« on: May 23, 2011, 08:23:28 pm »
Hello, I'm aware of some battery drain issues with rev C RNS 510 units and Rev K CAN modules - does anyone know if mine is OK?

Thanks in advance.

Address 19: CAN Gateway        Labels: 1K0-907-530.lbl
   Part No SW: 1K0 907 530 K    HW: 1K0 907 951
   Component: J533__Gateway   H04 0021 
   Revision:   H04 02    Serial number: 200107F2000973
   Coding: 3F0F034007000001
   Shop #: WSC 01279 785 00200
   VCID: 2F66ABA6C78D
E90 M3, E46 CSL Race car

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: Can I use an RNS 510 rev C with this CAN module?
« Reply #1 on: May 23, 2011, 11:47:18 pm »
That K gateway should be ok looking at its H version mate


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline _Nathan_

  • Always Involved
  • ****
  • Thank You
  • -Given: 3
  • -Receive: 1
  • Posts: 85
    • Race Data Systems - Motec Cosworth Aim Racelogic
Re: Can I use an RNS 510 rev C with this CAN module?
« Reply #2 on: May 24, 2011, 07:11:21 am »
Thanks  :happy2:
E90 M3, E46 CSL Race car