Boost Revo Stage 1 ED30

[_Nathan_]

Anyone know what the requested and actual boost is on an ED30 stage 1?

Also should requested fuel rail pressure really be 130 - can the stock HPFP even provide that (mine can't).

[Hedge]

It depends on how long it is requesting it.

Put some of your logs up and someone clever not me can compare them with some 2+ logs. 

[chungster]

around 1.3-1.4 bar from memory.....

[john_o]

I'd say you need to log other values too e.g. ignition delay to see what else is going on.
the boost levels seem a bit low tbh even for stage 1 (1300 mbar is about 19psi) where Im easily at 20+ (24 on guage) in the mid range.
but the revo are the experts....

[john_o]

my mid range is higher but my 6k value  is lower     (ill go dig out the plots later tonight)
OEM all but the map.
130 bar from fuel pump should be achievable once its spinning above 4k rpm

let us know what REVO say