What did you and your MKV do today?

[torque777]

Fitted mtec bulbs ...



sent using my own fingers

dude it looks like you have a light strip between your headlights and your fog lights ???
am i seeing things here as my car doesnt have that

That's as mine is a tdi variant ...which has the jetta front end ...


sent using my own fingers

[majinvash]

Just ordered a full set of Goodyear Asymetrics :)

[Degudodger]

Had a couple of hours to spare this morning so finally had a chance to replace the Gateway (Thanks Eddie) install a new 7P6J Bluetooth adapter and RCD510.

[Moz]

Gave it a clean, potentially for the last time, as I meet another forumista for a potential swap. ;)

[andybon]

Fitted the Eibach lowering springs, The vortex rear spoiler and the Jetta front bumper.

[Polo6n1600i]

312mm brakes fitted along with new pads, timing belt & water pump done, coilovers on & very low (tyres catching on inner arch liners on the back on 7.5x18 phaeton rims)

conversation went something like this:-

How low should we go?

Wind it all the way down as low as you can, then adjust it high enough to drive it.

Done!!

Maybe a little too low - but looks amazing
Used this as inspiration & made it look like a 4x4

[Polo6n1600i]

Eh.... I can't get any in!! Too tight!!

[Kalpsn2000]

^^^

[Polo6n1600i]

Ill get pics up tomorrow!!

[robern2]

..had new brembo rear discs and DS2500 pads fitted..

[scottm72]

Just ordered a full set of Goodyear Asymetrics :)

bbbbbbbrilliant tyres, just dont go near even a light frosting of snow with them,,
if you do you will know what i mean 

[scottm72]

Fitted mtec bulbs ...



sent using my own fingers

dude it looks like you have a light strip between your headlights and your fog lights ???
am i seeing things here as my car doesnt have that

That's as mine is a tdi variant ...which has the jetta front end ...


sent using my own fingers

ahh i see, its chrome basically, i thought you had fitted some drl's or something.
Appreciate the picture

[scottm72]

312mm brakes fitted along with new pads, timing belt & water pump done, coilovers on & very low (tyres catching on inner arch liners on the back on 7.5x18 phaeton rims)

conversation went something like this:-

How low should we go?

Wind it all the way down as low as you can, then adjust it high enough to drive it.

Done!!

Maybe a little too low - but looks amazing
Used this as inspiration & made it look like a 4x4

classic, as low as it can go lol, looks wicked
Even a sniff of a speed bump and its 

[Polo6n1600i]

That pic is what I used as inspiration. I had them rims on my last car

[torque777]

What rims are they ??

sent using my own fingers