My new spark plugs arrived today...I installed them, took it for a spin to check it. It was running great and then, all of a sudden, it would go powerless upon a request for acceleration.
I came back to the house to pull them and check the gaps. One looked to have no gap at all, but also looked to be dirty.
So...I took my wire gauge to see if their was or was not a gap and I saw something move.
I grabbed the threads and wiggled it back and forth
Right, the threads were broken.
I also noticed their was no crush washer on that particular plug, but there was on the other three. I thought perhaps it fell off down in the plug's tube.
But there was no force applied to the magnet when I inserted it to check for the washer.
I can only assume that the increased pressure popped the plug
I only hope the outfit will send another or I will have to replace just the one...if possible.
