What did you and your MKV do today?

GPem3:16 · February 20, 2018, 03:53:30 PM

With all this talk of cleaning.....I ought to get the foamer out.

In other news I swapped the headrests over from front to back...looks sweet tbf.

Sent from my SM-G930F using Tapatalk

GPem3:16 · February 20, 2018, 03:53:38 PM

With all this talk of cleaning.....I ought to get the foamer out.

In other news I swapped the headrests over from front to back...looks sweet tbf.

Sent from my SM-G930F using Tapatalk

pudding · February 20, 2018, 04:11:59 PM

Wow, getting the foamer out 5 times

GPem3:16 · February 20, 2018, 04:41:34 PM

Quote from: Pudding on February 20, 2018, 04:11:59 PM
Wow, getting the foamer out 5 times

Ooops phone problems. My bad

Sent from my SM-G930F using Tapatalk

GPem3:16 · February 20, 2018, 04:41:48 PM

Quote from: Pudding on February 20, 2018, 04:11:59 PM
Wow, getting the foamer out 5 times

Ooops phone problems. My bad

Sent from my SM-G930F using Tapatalk

GPem3:16 · February 20, 2018, 04:42:28 PM

Technical issues :laughingface.

Sent from my SM-G930F using Tapatalk

GPem3:16 · February 20, 2018, 04:44:01 PM

Wtf is with this sending multiple messages

Sent from my SM-G930F using Tapatalk

Nardoblue · February 20, 2018, 11:04:47 PM

Cleaned it and the other toy

ROH ECHT · February 21, 2018, 09:56:45 AM

Quote from: Nardoblue on February 20, 2018, 11:04:47 PM
Cleaned it and the other toy

Love the GSX1100....1984? Back in 1980 those GSX1100's were the beasts to beat. My 1976 Kawasaki KZ900, with jets/intakes/exhaust/sprockets/lowered/stripped and cafe'd, had trouble with those and the Honda CBX 6 cyl. monsters.

My kz900 started out like...

...and ended up a lot like this 1000 with diff wheels and as much black as I could put on it...

Ads22 · February 25, 2018, 04:21:49 PM

Not much of a whiz with DIY but managed to hardwire dashcam

And then also fitted leather cover to my cloth armrest

Christiank · February 25, 2018, 06:54:32 PM

Manged to finaly get the wirering done for the active TMPS

Also retrofitted heated windshield washer jets, black mk6 golf headliner and pillar trims.

willni · February 25, 2018, 08:31:20 PM

Advanced a bit with my Passat CC climate control retrofit (Copying @ChristianK ) waiting for the filler to dry to smooth it out fully

Sent from my iPhone using Tapatalk

Christiank · February 26, 2018, 04:58:43 AM

Quote from: willni on February 25, 2018, 08:31:20 PM
Advanced a bit with my Passat CC climate control retrofit (Copying @ChristianK ) waiting for the filler to dry to smooth it out fully

Sent from my iPhone using Tapatalk

You're getting there mate! :D

Did you use the repo plast glue or did you end up with a solder iron?

willni · February 26, 2018, 11:16:51 AM

Quote from: Christiank on February 26, 2018, 04:58:43 AM

You're getting there mate! :D

Did you use the repo plast glue or did you end up with a solder iron?

Tried the epoxy glue first but it didn't work out didn't harden fully (got to about 50% think it was the cold), so I needed up using a soldering iron and two pin nails and joining the two through a weld.

Now I'm just working on the edges to get them nice and straight.

Also did you have to cut two tabs off from the dash just above the two outter circles?

Sent from my iPhone using Tapatalk

Christiank · February 26, 2018, 04:15:59 PM

Quote from: willni on February 26, 2018, 11:16:51 AM
Quote from: Christiank on February 26, 2018, 04:58:43 AM

You're getting there mate! :D

Did you use the repo plast glue or did you end up with a solder iron?

Tried the epoxy glue first but it didn't work out didn't harden fully (got to about 50% think it was the cold), so I needed up using a soldering iron and two pin nails and joining the two through a weld.

Now I'm just working on the edges to get them nice and straight.

Also did you have to cut two tabs off from the dash just above the two outter circles?

Sent from my iPhone using Tapatalk

I didn't cut anything at the dashboard, all were done to the frame :)