Exhaust light on after stage 2 ?? Help with fault codes please...

[heavyd]

Oh well, thought it was all too good to be true.....
I have this code on, MIL ON.
I saw the code last week but cleared it off as there was no MIL on the dash. Well its back again. It was only a year ago I went through this with the stage 2+ Revo that I got a refund on. Now the stage 2 file I had loaded on is doing the same

Thursday,09,February,2012,16:59:45:05205
VCDS Version: Release 11.11.1

                Address 01: Engine       Labels: 06F-907-115-AXX.lbl
Control Module Part Number: 1K0 907 115 L    HW: 8P0 907 115 B
  Component and/or Version: 2.0l R4/4V TFSI     0030
           Software Coding: 040300031C070160
            Work Shop Code: WSC 80176 538 403142
                      VCID: 2F43C984BE066CC
1 Fault Found:

008584 - Bank 1; System too Rich at Idle
               P2188 - 008 -  - MIL ON
             Freeze Frame:
                    Fault Status: 11101000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 76620 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 16:31:38

             Freeze Frame:
                    RPM: 756 /min
                    Load: 22.7 %
                    Speed: 0.0 km/h
                    Temperature: 81.0°C
                    Temperature: 6.0°C
                    Absolute Pres.: 1030.0 mbar
                    Voltage: 14.351 V

code from last week

Saturday,04,February,2012,13:22:10:05205
VCDS Version: Release 11.11.1

                Address 01: Engine       Labels: 06F-907-115-AXX.lbl
Control Module Part Number: 1K0 907 115 L    HW: 8P0 907 115 B
  Component and/or Version: 2.0l R4/4V TFSI     0030
           Software Coding: 040300031C070160
            Work Shop Code: WSC 80176 538 403142
                      VCID: 2F43C984BE066CC
1 Fault Found:

008584 - Bank 1; System too Rich at Idle
               P2188 - 008 -  - Intermittent
             Freeze Frame:
                    Fault Status: 00101000
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 76303 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 15:49:41

             Freeze Frame:
                    RPM: 725 /min
                    Load: 27.0 %
                    Speed: 4.0 km/h
                    Temperature: 83.0°C
                    Temperature: 11.0°C
                    Absolute Pres.: 1020.0 mbar
                    Voltage: 13.081 V

[Gti_Mad]

sh*t sorry 2hear your havion problems again dude, not havin much luck are ya mate 

i reckon you should try the apr map if anything seen as you've had nothing but problems with every1 else

[Saintsteve]

What intake are you running?

[heavyd]

ITG intake.
Its only ever Revo software I have this problem on
I've had every other companies software on and it only appears with Revo, same as last year

[Tfsi_Mike]

ITG intake.
Its only ever Revo software I have this problem on
I've had every other companies software on and it only appears with Revo, same as last year

When you trying APR Dom 

[Saintsteve]

ITG intake.
Its only ever Revo software I have this problem on
I've had every other companies software on and it only appears with Revo, same as last year

Ditch Revo then 

I'd try running a panel filter to see if the fault re occurs personally

[rich83]

heavyd... who installed the REVO software?

Thats the exact same fault code i had, when i had the wrong map file installed.

[heavyd]

I had it re-flashed today by PDT. it had version 9 on, and now has version 10b 
Will know in a couple of days if it has worked or not

[heavyd]

Well I've done a fair few miles now, no faults showing on vcds, so looks like the update worked. Thanks to PDT yet again