Make a donation

Author Topic: kufatec adaptor question  (Read 1383 times)

Offline ali6n2

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 12
  • Posts: 193
kufatec adaptor question
« on: June 30, 2011, 11:52:26 am »
Basically looking to hook up xenons without the autolevelling.
on the site there are two looms, one with a wire sticking out.
If i purchase the bi xenon one with the extra wire but do not hook up the feature would it be ok i.e. no dash errrors etc. or do i just order the simple one.

il have no problem fitting them, however would appreciate any help on the programming side. based in leeds,w/yorks./

thanks

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: kufatec adaptor question
« Reply #1 on: June 30, 2011, 12:18:18 pm »
The one with the wire enables the bi-xenon functionality.

If you do not connect this wire, you wont get xenon high beam and it will be just halogen as you currently have

When coding if the wire is not connected, you need to choose 'Xenons without shutters installed'


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.

Offline QD MBE

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 15
  • -Receive: 102
  • Posts: 2497
Re: kufatec adaptor question
« Reply #2 on: June 30, 2011, 12:26:50 pm »


Pin 11 on each HID light, to A5 and D6 at the CECM will activate the Xenon shutters (post coding).

Offline ali6n2

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 12
  • Posts: 193
Re: kufatec adaptor question
« Reply #3 on: June 30, 2011, 12:30:49 pm »
thanks for the quick response guys. just going to order the adaptor now.

Offline ali6n2

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 12
  • Posts: 193
Re: kufatec adaptor question
« Reply #4 on: June 30, 2011, 12:35:47 pm »
also, one more thing. if the bi xenons are active, does the halogen bulb just remain idle?

Offline alexperkins

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 7
  • -Receive: 99
  • Posts: 2122
Re: kufatec adaptor question
« Reply #5 on: June 30, 2011, 12:39:03 pm »
The halogen is used as an addition main beam with the xenon main beam

Its also used for 'flash to pass' in day time when the headlights are off.


VCDS Scanning/Coding, RNS and MDI retrofits, and specialist mechanics services with VAGtek available - Just PM me for details.