Evening all,
So, today I decided I wanted the origional radio back in my car which I knew exactly how to do. Once the origional was connected I decided to turn the engine on just to make sure the radio turned on and off with the car before replacing the trim and all was fine. I then disconnected the radio again to try and sort the bluetooth kit which I have had loads of problems with but ended up leaving it disconnected. I then just reconnected the radio put all the trim back and left it.
A few hours later I came to the car to go into town and turned the key and nothing happened, didnt even turn over. after some inspection I found all the electrics worked (radio,windows,lights etc) but no engine lights were shown on the speedo. I have talked to a few mates and a local garage and no one can decide what it could be. I have checked all the fuses, tried push starting and jump leads but nothing worked. An uncle came to have a look for me and he said I may have disturbed some sort of cable or connector when i was changing the radio and thinks I should take all the trim off around the glove box to see if I can find a loose cable.
Has anyone had anything like this or maybe knows what could be wrong. Obviously the car wont start so I cant get it to a garage and dont really want to pay to be towed to one to find out it was just a cable come loose.
Thanks
Rich