Sy's vRS APR/LOBA Hybrid - Now replaced with a proper car!

[damoegan]

Bit of a typoi in there Sy, you have put on the top of the Jabba graph that they used 2.3bar of boost 

 

[Janner_Sy]

Just been pointed out on t'other forum.  I was merely talking of absolute pressure there 

[chungster]

You started a thread on this XDS remap from weak to strong? I'd like to know more!

Cheers 

[Janner_Sy]

Yank forums

http://www.golfmk6.com/forums/showthread.php?t=25039
I just want to share what I found yesterday when playing with VCDS software.
Maybe it will be helpful for some of you guys. Mostly for those who track their cars and want less electronic assist. I'm not encouraging anyone to change the stock settings, so if you want to change something proceed at your own risk.

In VCDS Select Control Module, go to 03 ABS Brakes, then 10 Adaptation, go to Channel:

Channel 09 Brake Assist
There are 3 settings for this
0-center (stock setting)
1-small
2-hard
I tasted this one and finally locked it in value 2. I think the brake pedal and the whole system are more sensitive. My car was not braking any better but I did not have to push down the brake pedal as low as before and as hard as before to start braking.

Channel 36 XDS
There are 3 settings
0-center (stock setting)
1-weak
2-strong

Channel 54 DSR
There are 3 settings
0-strong (stock setting)
1-center
2-weak

Channel 58 Hill Hold Assist
There are 3 settings
0-normal
1-early (start with low RPM's)
2-late (start with high RPM's and slipping clutch)

Channel 89 ASR
Two settings
1-on (stock setting)
2-off
I tried to turn it off, the new setting was saved but after I disconnected and connected the vag com cable to check it out it was set back to value 1-“on” . So, I think it's not possible to turn it off with the VCDS software.

Channel 90 ESP
Two settings
1-on (stock setting)
2-off
The same thing as with the ASR. I was able to turn it off but it was set back to “on” setting after disconnecting and connecting the vag com cable.
Channel 91 Automatic, ESP switch on, Speed
There are 4 boxes 1-Automatic, 2-ESP switch on, 3-Speed, 4-Deactivated (this setting can be changed)
Boxes 1 to 3 describe probably condition which are already programmed
Two settings
0-Deactivated (stock setting)
1-Enabled

[damoegan]

....I was merely talking of absolute pressure there 

Yea, righ 

[Deako]

So why have APR got your car for 2 weeks then Sy?? 

[Janner_Sy]

it involves shiny new parts, new maps and a faster car.  This might all go to rat sh1t still though, parts are ordered, cars booked in, just need to hope for no setbacks

[Tfsi_Mike]

Im suddenly hankering for the homomobiles better looking cousin 

[Janner_Sy]

Im suddenly hankering for the homomobiles better looking cousin 

what the Octavia....

You watch parts of my engine start to bend 

[Tfsi_Mike]

Im suddenly hankering for the homomobiles better looking cousin 

what the Octavia....

You watch parts of my engine start to bend 

Polo.

Im thinking about Rods more lately.  Need a linear throttle to control the extra boost so things dont start to bend 

[Janner_Sy]

it wont have linear throttle yet 

[Deako]

How come? Not happy with the Jabba map?

[Janner_Sy]

very very happy withthe jabba map, but APR made a series of offers i couldnt turn down.

[vRS Carl]

but APR made a series of offers i couldnt turn down.

Bukkake Party followed by a Rectal Root in the back seat??

[Hedge]