Make a donation

Author Topic: Retrofit RNS510 and MFSW buttons to midline dash car  (Read 1608 times)

Offline RagingKileak

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 191
Retrofit RNS510 and MFSW buttons to midline dash car
« on: August 08, 2011, 10:13:36 am »
Hi all,

Just a quick one.

Fit an RNS510 and some MFSW buttons to my 07 ED30 with midline dash.

The car is DSG so buttons and control box were easy to fit and they power/light up ok and will change volume on the RNS510.

However, no other buttons work. The * and phone buttons I'm not bothered about, or even the menu etc, but coding in the skip up/down buttons would be great if poss.

Any ideas?

Thanks
Matt

Offline kalu

  • Always Involved
  • ****
  • Thank You
  • -Given: 4
  • -Receive: 9
  • Posts: 75
    • Email
Re: Retrofit RNS510 and MFSW buttons to midline dash car
« Reply #1 on: August 08, 2011, 01:58:51 pm »
Hi all,

Just a quick one.

Fit an RNS510 and some MFSW buttons to my 07 ED30 with midline dash.

The car is DSG so buttons and control box were easy to fit and they power/light up ok and will change volume on the RNS510.

However, no other buttons work. The * and phone buttons I'm not bothered about, or even the menu etc, but coding in the skip up/down buttons would be great if poss.

Any ideas?

Thanks
Matt

You need a Highline cluster to use the MFSW to its full potential...

Offline danishmkvgti

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 243
  • -Receive: 154
  • Posts: 3680
    • Email
  • My Ride: http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.0.html
Re: Retrofit RNS510 and MFSW buttons to midline dash car
« Reply #2 on: August 08, 2011, 02:34:11 pm »
Hi all,

Just a quick one.

Fit an RNS510 and some MFSW buttons to my 07 ED30 with midline dash.

The car is DSG so buttons and control box were easy to fit and they power/light up ok and will change volume on the RNS510.

However, no other buttons work. The * and phone buttons I'm not bothered about, or even the menu etc, but coding in the skip up/down buttons would be great if poss.

Any ideas?

Thanks
Matt

Highline is needed for full functionality, there's no other way  :smiley:

Over the top mod list ;o)

Offline RagingKileak

  • Always Involved
  • ****
  • Thank You
  • -Given: 1
  • -Receive: 4
  • Posts: 191
Re: Retrofit RNS510 and MFSW buttons to midline dash car
« Reply #3 on: August 08, 2011, 04:24:27 pm »
Meh, never mind...

Wish I had known that beforehand lol.

Highline will have to be the next mod then, as planned and later abandoned!

Thanks

Matt

Offline LouCyffer

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 36
  • -Receive: 63
  • Posts: 875
Re: Retrofit RNS510 and MFSW buttons to midline dash car
« Reply #4 on: August 11, 2011, 04:38:51 pm »
Matt, even though you have a midline, the up & down buttons should move you through the various parameters on the midline display; range, economy, average speed, time etc. I think you need to check your VCDS coding in case you've missed something.

I did exactly the same with my car, and before I put highline in, the right side up/down buttons worked the midline dash. The star button mutes the RNS510, and the phone button doesn't work, as my Skoda bluetooth would play with it!

It's either in the coding, or your central convenience (but I doubt that).
Black 2008 5 door GTI. Leather, DSG, ipod prep, 18" Monzas. Retrofitted: Cruise, PDC, RNS510, 729 Skoda Bluetooth (thanks SteveP), MFSW buttons (thanks MortyGTTDi), Armrest & vents, covered cupholder, Highline (thanks Kalu), Polar FIS+ (thanks Richn), Reversing camera (thanks MortyGTTDi)