Make a donation

Author Topic: Clock codes and identification (highline upgrade)  (Read 662 times)

Offline RSam84

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 248
    • Email
Clock codes and identification (highline upgrade)
« on: August 22, 2011, 06:50:53 pm »
Hi guys ive just pulled the clocks out of my brothers GT TDI, here are the pics of it:




i think this is the important one:


so looking at that id say the code is: 1K092064B.

am i correct? so would i need to swap it with a highline with the code: 1K092074B? will these clocks be ok:




final question how much are we looking for coding them in?!

Cheers from Sam n Joe!

Offline RSam84

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 248
    • Email
Re: Clock codes and identification (highline upgrade)
« Reply #1 on: August 23, 2011, 05:01:09 pm »
Anyone??

Offline Richn83

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 49
  • -Receive: 85
  • Posts: 1883
Re: Clock codes and identification (highline upgrade)
« Reply #2 on: August 23, 2011, 08:33:50 pm »
those clocks should be fine as they have the same immo type, as for coding you will need to get a specialist to look at it your best bet is to give Kalu a pm.

5Dr Black GTI, DSG, Leather, Xenons. Retrofitted - Cruise, RNS 510, MFSW, Armrest, Skoda BT, 6cd changer, Monza II's, VW speaker upgrade kit, Lux pack, High-line, new CAN gateway, Polar FIS info display, R32 tinted rear lights, RVC

To Come...NQSBBK, highline CCM.

Offline LouCyffer

  • Won't Shut up.
  • *****
  • Thank You
  • -Given: 36
  • -Receive: 63
  • Posts: 875
Re: Clock codes and identification (highline upgrade)
« Reply #3 on: August 23, 2011, 09:37:35 pm »
To my knowledge, Kalu is the only guy who can do this. You will need a 974 cluster, the letter after it simply denotes country of origin & that's no real worry. You can change the foil backings in, for example, a US spec temperature display (Fahrenheit) to UK celcius by reusing your old ones.

Now you need to find the corresponding cluster. Get googling!
Black 2008 5 door GTI. Leather, DSG, ipod prep, 18" Monzas. Retrofitted: Cruise, PDC, RNS510, 729 Skoda Bluetooth (thanks SteveP), MFSW buttons (thanks MortyGTTDi), Armrest & vents, covered cupholder, Highline (thanks Kalu), Polar FIS+ (thanks Richn), Reversing camera (thanks MortyGTTDi)

Offline RSam84

  • Always Involved
  • ****
  • Thank You
  • -Given: 0
  • -Receive: 2
  • Posts: 248
    • Email
Re: Clock codes and identification (highline upgrade)
« Reply #4 on: August 23, 2011, 10:26:03 pm »
luckly the 2nd set of clocks pictured are ours already! we saw a cheap set of highline clocks on ebay and bought them with the risk that they would be right and amazingly they were!  :happy2:

just need to get in touch with kalu and sort it out!